Because there are many ways to deal with it or to do it and there are many different things
Answer:
Check the explanation
Explanation:
CPI means Clock cycle per Instruction
given Clock rate 600 MHz then clock time is Cー 1.67nSec clockrate 600M
Execution time is given by following Formula.
Execution Time(CPU time) = CPI*Instruction Count * clock time = 
a)
for system A CPU time is 1.3 * 100, 000 600 106
= 216.67 micro sec.
b)
for system B CPU time is 
= 333.33 micro sec
c) Since the system B is slower than system A, So the system A executes the given program in less time
Hence take CPU execution time of system B as CPU time of System A.
therefore
216.67 micro = =
Instructions = 216.67*750/2.5
= 65001
hence 65001 instruction are needed for executing program By system B. to complete the program as fast as system A
Answer:
A wave of sound!
Explanation:
sound waves are sound but sound comes in different wavelengths
<span>Step 1Determine what type of connection you need for your computer and printer. If you see a large rectangular connection on your printer it is a parallel printer, and you will need to make sure you have a parallel port on your computer. This connection will be long and rectangular, and it may be red in color. If your Canon printer has a small square connection on the back it is a USB printer, and you will need to look for a flat slot on your computer to hook it up.Step 2Connect the printer and computer. If you are working with a parallel printer connect the large end of the cable to the back of the printer and the smaller end to the computer. If you have a USB printer, connect the square end of the cable to the back of the printer and the flat end to a free USB port on your computer.Step 3Turn on your printer and the computer. Insert the print cartridges that come with the printer. Watch the lower right-hand corner of your computer screen for a "found new hardware" message. This is your indication that the operating system has found your new printer and is installing the proper driver for it.Step 4Insert the CD that comes with your printer, if you are prompted to do so. If your operating system was unable to find a suitable driver it will prompt you for the CD. Keep your CD handy anyway, because you will need it to install the printer utilities.Step 5Insert the CD and allow it to install your printer utilities. After the utilities are installed you will be prompted to clean and align the print heads on your new printer. After the print heads have been aligned your new Canon printer will be ready for use.hope this helps</span>
