S= 343m/s
F=256Hz
WL= 343ms/256-1
WL=V/F
= 1.339844m
Greetings!
The correct answer choice is Choice 4.
<em>Why?</em>
In a scientific experiment the only thing being changed is the independent variable. Everything else should stay the same.
In this experiment, the independent variable is the amount of sunlight each plant should receive. <em>Here's a tip</em>- when looking for and independent variable look for whats being changed on purpose.
Hope this helps!
~Fluerie
Answer:
Push and pull both are forces , but the difference is in their direction at which it is applied . If the force applied in the direction of motion of the particle then we call it as push . If that force applied in the direction OPPOSITE to the motion of particle then it is termed as pull
Answer:
The minimum inductance needed is 2.78 H
Explanation:
Given;
frequency of the AC, f = 26.5 Hz
the root mean square voltage in the circuit, 
= 41.2 V
the maximum current in the circuit, I₀ = 126 mA
The root mean square current is given by;
The inductive reactance is given by;
The minimum inductance needed is given by;
Therefore, the minimum inductance needed is 2.78 H
Answer:
Explanation:
Temperature is the degree of hotness or coldness of a body.
Energy is the ability to do work by a body. They are of two forms, potential and kinetic energy. Potential energy is due to the position of a body whereas kinetic energy is due to the motion of a body.
Motion is the change in position of a body with time.
Temperature, energy and motion are all related.
Thermal energy is a form of kinetic energy which is concerned about the motion particles. This form of energy results from heat changes in a body which causes temperature differences.
When a body is heat and changes temperature, the particles begins to vibrate as they gain, thermal energy, a form of kinetic energy. At a point, the particles will break lose and set in motion.
