Answer:
82.79MPa
Step-by-step explanation:
Minimum yield strength for AISI 1040 cold drawn steel as obtained from literature, Sᵧ = 490 MPa
Given, outer radius, r₀ = 25mm = 0.025m, thickness = 6mm = 0.006m, internal radius, rᵢ = 19mm = 0.019m,
Largest allowable stress = 0.8(-490) = -392 MPa (minus sign because of compressive nature of the stress)
The tangential stress, σₜ = - ((r₀²p₀)/(r₀² - rᵢ²))(1 + (rᵢ²/r²))
But the maximum tangential stress will occur on the internal diameter of the tube, where r = rᵢ
σₜₘₐₓ = -2(r₀²p₀)/(r₀² - rᵢ²)
p₀ = - σₜₘₐₓ(r₀² - rᵢ²)/2(r₀²) = -392(0.025² - 0.019²)/2(0.025²) = 82.79 MPa.
Hope this helps!!
But how many feet is he running each time?
Answer:
Step-by-step explanation:
a). 
Therefore, common denominator of 20.
b). 
Common denominator of 10.
c). 
= 
= 
Common denominator of 48.
It’s C. divide the diameter by 2 which is 12.2. then it’s pi • r^2. so 3.14 • 12.2^2 =467.36
Answer:
=
Step-by-step explanation:
