Answer:
Tresca FOS ,N=4.49
Von mises theory FOS N=4.27
Explanation:
Cross sectional area of shaft A=
Bending stress =101.91 MPa (M=10 KN-m)
Shear stress =40.76 MPa (T=8 KN-m)
Axial stress=19.23 MPa
Now find the principle stress
Now put the values
From tresca theory
N=4.49
From Von mises theory
N=4.27
Answer:
Plumbing using a one-way check valve to stop water flowing back on a pump when the pump shuts off.
Explanation:
Diodes are like check valves, keeping current from flowing both ways. Used to create d.c. out of a.c by rectification. Also to block flow if d.c. power like a battery is hooked up in reverse polarity.
Answer:
ExplanationAir at 1 atm and 20°C flows tangentially on both sides of a thin, smooth flat plate of ... ... Smooth Flat Plate Of Width W = 10 Ft, And Of Length L 3 Ft In The Direction Of The Flow. The Velocity Outside The Boundary Layer Is Constant At 20 Ft/s.
:
Answer:hopefully this helps
Explanation:A MIDI drum machine was connected to a box of electronics containing a series of relays, which in turn operate solenoid valves, causing the pneumatic rams to function. The rams were connected to various mechanisms that strike the drums in accordance to the rhythm programmed on the Groovebox. The smoke machine was also controlled via MIDI.
There was also some circuitry added to control the length of the pulse sent to the solenoid valve, so that the time before the air flow in the ram was reversed could be adjusted to create an optimum percussive sound. The rod seals were machined to make the rams act faster
Answer:
Check the explanation
Explanation:
Kindly check the attached images below to see the step by step explanation to the question above.