Answer:
0.5°c
Explanation:
Humidity ratio by mass can be expressed as
the ratio between the actual mass of water vapor present in moist air - to the mass of the dry air
Humidity ratio is normally expressed in kilograms (or pounds) of water vapor per kilogram (or pound) of dry air.
Humidity ratio expressed by mass:
x = mw / ma (1)
where
x = humidity ratio (kgwater/kgdry_air, lbwater/lbdry_air)
mw = mass of water vapor (kg, lb)
ma = mass of dry air (kg, lb)
It can be as:
x = 0.005 (100) / [(100 - 100)]
x = 0.005 x 100 / (100 - 100)
x = 0.005 x 100 / 0
x = 0.5°c
So the temperature to which atmospheric air must be cooled in order to have humidity ratio of 0.005 lb/lb is 0.5°c
Answer:
What is the difference Plastic vs elastic deformation
Explanation:
The elastic deformation occurs when a low stress is apply over a metal or metal structure, in this process, the stress' deformation is temporary and it's recover after the stress is removed. In other words, this DOES NOT affects the atoms separation.
The plastic deformation occurs when the stress apply over the metal or metal structure is sufficient to deform the atomic structure making the atoms split, this is a crystal separation on a limited amount of atoms' bonds.
Answer:
it has 15 horsepower to 300 horsepower and it weighs 2,906 to 3,131
Explanation:
its torque is 142 to 180
it has a inline 4 engine
there's a SE-R which has a turbo
Answer:
attached below is the detailed solution and answers
Explanation:
Attached below is the detailed solution
C(iii) : versus the parameter C
The parameter C is centered in a nonlinear equation, therefore the standard locus will not apply hence when you use a polynomial solver the roots gotten would be plotted against C
Answer:
Integrity: involves maintaining and assuring the accuracy of data over its life-cycle
Explanation:
Confidentiality: This is a CIA triad designed to prevent sensitive information from reaching the wrong people, while making sure that the right people have access to it.
Integrity: This is a CIA triad that involves maintaining the consistency, accuracy, and trustworthiness of data over its entire life cycle.
Availability: This is a CIA triad that involves hardware repairs and maintaining a correctly functioning operating system environment that is free of software conflicts.
Authentication:This is a security control that is used to protect the system with regard to the CIA properties.
