Answer:
That's a high score!
This is a test question!
Explanation:
The reason these two lines are printed and not the first one is simple. After the 'IF' condition has been stated, there is no use of parenthesis such as { and } to enclose the next lines. This means that only the first line after the 'IF' condition may be read or skipped depending on whether the condition (score>95) is met. Since the score is not larger than 95, and the 'IF' condition fails, the line 'Congratulations!' is not printed. The next two lines of the code are read as normal because they do not depend on the 'IF' condition.
Answer
Being drunk, texting, being distracted
Explanation:
Hope this helped.
Explanation:
1. A sequence of instructions is stored in memory.
2. The memory address wherever the first instruction is found is copied to the instruction pointer.
3. The CPU sends the address within the instruction pointer to memory on the address bus.
4. The CPU sends a “read” signal to the control bus.
5. Memory responds by sending a copy of the state of the bits at that memory location on the
data bus, that the CPU then copies into its instruction register.
6. The instruction pointer is automatically incremented to contain the address of the next
instruction in memory.
7. The CPU executes the instruction within the instruction register.
8. Go to step 3
Steps 3, 4, and 5 are called an instruction fetch. Notice that steps 3 – 8 constitute a cycle, the instruction execution cycle. It is shown graphically below.
A DMA controller can generate memory addresses and initiate memory read or write cycles. It contains several hardware registers that can be written and read by the CPU. These include a memory address register, a byte count register, and one or more control registers.
Follow traffic signs , Keep distance between cars , Be patient in traffic.
