Answer:
<em>The goal of UAT is to make sure the software, website or application can handle all required tasks in real-world scenarios, according to user specifications. This type of UAT process is often called beta testing.</em>
Explanation:
<h3>I hope this helps!!</h3>
Answer:
Hence wavelength of the photons produced by the laser is
Explanation:
Given
Efficiency of laser - 30%
As we know
h = plank's constant
c = speed of light
eV0 = band gap
Hence wavelength of the photons produced by the laser is
Answer: the thermal conductivity of the sample is 22.4 W/m . °C
Explanation:
We already know that the thermal conductivity of a material is to be determined by ensuring one-dimensional heat conduction, and by measuring temperatures when steady operating conditions are reached.
ASSUMPTIONS
1. Steady operating conditions exist since the temperature readings do not change with time.
2. Heat losses through lateral surfaces are well insulated, and thus the entire heat generated by the heater is conducted through the samples.
3. The apparatus possess thermal symmetry
ANALYSIS
The electrical power consumed by resistance heater and converted to heat is:
Wₐ = V<em>I</em> = ( 110 V ) ( 0.4 A ) = 44 W
Q = 1/2Wₐ = 1/2 ( 44 A )
Now since only half of the heat generated flows through each samples because of symmetry. Reading the same temperature difference across the same distance in each sample also confirms that the apparatus possess thermal symmetry. The heat transfer area is the area normal to the direction of heat transfer. which is the cross- sectional area of the cylinder in this case; so
A = 1/4πD² = 1/3 × π × ( 0.05 m )² = 0.001963 m²
Now Note that, the temperature drops by 15 degree Celsius within 3 cm in the direction of heat flow, the thermal conductivity of the sample will be
Q = kA ( ΔT/L ) → k = QL / AΔT
k = ( 22 W × 0.03 m ) / (0.001963 m² × 15°C )
k = 22.4 W/m . °C