Answer:
a) 12.74 V
b) Two pairs of diode will work only half of the cycle
c) 8.11 V
d) 8.11 mA
Explanation:
The voltage after the transformer is relationated with the transformer relationshinp:
the peak voltage before the bridge rectifier is given by:
The diodes drop 0.7v, when we use a bridge rectifier only two diodes are working when the signal is positive and the other two when it's negative, so the peak voltage of the load is:
As we said before only two diodes will work at a time, because the signal is half positive and half negative,so two of them will work only half of the cycle.
The averague voltage on a full wave rectifier is given by:
Using Ohm's law:
Answer:
Explanation:
wave motion is defined as the propagation of the disturbance due to continous vibration of the molecules of the medium. Waves oduced due to disturbance carry only energy but not the matter.
The waves move water up and down and carry the energy.
Therefoe, the statement "(a) The waves carry water outward away from where the rock hit. The moving water carries energy outward"is incorrect.
The waves move water up and down and carry the energy, but not matter.
Therefore, the statement "(c) The waves ony make the water move u and down. No energy is carried outward from where the rock hit" is incorrect.
When a rock is droed ito a pd, a disturbance starts from the point where the stone hits the water. The waves produced carry the energy from the starting point toother locatons over a large distance which is not possible by the single molecules of water.
Therefore, the statement "(c) The waves only make the water move up and down, but the waves do carry energy outward away from where the rock hit" is correct.
Answer:
d in my opinion is the most opitmal answer
Explanation:
aka a graph comparing distances traveled by objects thrown on Earth and the moon
Answer:
maximum possible temperature is 34.088°C
Explanation:
Given data
power output Q = 37 kW
volume flow rate = 11 x 10^-5 m3/s
temperature t = 14°C
to find out
maximum possible temperature T
solution
we can say
total water volume = 4 residents × volume flow
total water volume = 4 × 11 x 10^-5 = 44 × 10^-5 m³/s
so we say total water mass = 1000 × volume
total water mass = 1000 kg/m³ × 44 × 10^-5
total water mass = 0.44 kg
we know
dQ/dt = (dm/dt)× (S)× ( T - t)
so here we know specific heat of water S = 4.186 joule/gram °C
37 = 0.44 × 4.186 × (T-14)
T = 34.088°C
maximum possible temperature is 34.088°C
Answer:
b is called the power of base 10.
Explanation:
In the scientific notation form
the exponent b is called the power of the base 10.
