Just find the density of every metal and select the one with a density of 2.71 g/cm³ . This is:
Metal 1
ρ = m/V
ρ = 22.1 g / 3 cm³
ρ = 7.367 g / cm³
Metal 2
ρ = m/V
ρ = 42 g / 4 cm³
ρ = 10.5 g / cm³
Metal 3
ρ = m/V
ρ = 9.32 g / 5 cm³
ρ = 1.864 g / cm³
Metal 4
ρ = m/V
ρ = 8.13 g / 3 cm³
ρ = 2.71 g / cm³
<h2>R / Metal 4 was selected.</h2>
Answer:
<em>The second option has a lower power output. P=30 W</em>
Explanation:
<u>Mechanical Power
</u>
It is a physical magnitude that measures the rate a work W is done over time t.
Since W=F.d
The first option means the worker will lift the box by a distance of 1.2 meters in 3 seconds by applying 250 N of force. That produces a power of
The second option requires the worker applies 75 N of force and travel a distance of 4 meters for 10 seconds, thus the power is
The second option has a lower power output
Parallel circuit
Advandages: 1. Every unit that is connected in a parallel circuit gets equal amount of voltage.
2. It becomes easy to connect or disconnect a new element without affecting the working of other elements.
3. If any fault happened to the circuit, then also the current is able to pass through the circuit through different paths.
Disadvantages: 1. It requires the use of lot of wires.
2. We cannot increase or multiply the voltage in a parallel circuit.
3. Parallel connection fails at the time when it is required to pass exactly same amount of current through the units.
series circuit
Advantages: 1. Series circuits do not overheat easily. This makes them very useful in the case of something that might be around a potentially flammable source, like dry plants or cloth.
2. Series circuits are easy to learn and to make. Their simple design is easy to understand, and this means that it’s simple to conduct repairs .
3. we can add more power devices, they have a higher output in terms of voltage .
4. The current that flows in a series circuit has to flow through every component in the circuit. Therefore, all of the components in a series connection carry the same current.
Disadvantages: 1.If one point breaks in the series circuit,the total circuit will break.
2. As the number of components in a circuit increases ,greater will be the circuit resistance.
The answer would be acceleration.
