Answer:
D. The tea loses heat to the spoon causing the spoon to become warmer
Explanation:
When the silver spoon at a lower temperature than the tea, is added to the tea, it makes thermal contact. Hence, the heat transfer starts between the two until the equilibrium is reached. We know that the heat transfer takes place from the body with a higher temperature to a body with a lower temperature. As a result, the body with higher temperature loses heat and its temperature lowers down. While the body with a lower temperature gains heat and its temperature rises.
Therefore, the correct option is:
<u>D. The tea loses heat to the spoon causing the spoon to become warmer</u>
Solar cells and solar panels are both integral, and closely related, parts of a solar energy system. When reading about solar energy systems, it may seem as if these titles are almost interchangeable. Writers refer to them both when discussing energy production and output, and often do so without explanation of how these parts work. However, each plays a distinct role. Solar cells contain all the parts necessary to convert sunlight to electricity. Solar panels combine and direct all of that energy output.
Recall this kinematic equation:
a = 
This equation gives the acceleration of the object assuming it IS constant (the velocity changes at a uniform rate).
a is the acceleration.
Vi is the initial velocity.
Vf is the final velocity.
Δt is the amount of elapsed time.
Given values:
Vi = 0 m/s (the car starts at rest).
Vf = 25 m/s.
Δt = 10 s
Substitute the terms in the equation with the given values and solve for a:
a = 
<h3>a = 2.5 m/s²</h3>
Answer:
θ=108rad
t =10.29seconds
α=-8.17rad/s²
Explanation:
Given that
At t=0, Wo=24rad/sec
Constant angular acceleration =30rad/s²
At t=2, θ=432rad as it try to stop because the circuit break
Angular motion
W=Wo+αt
θ=Wot+1/2αt²
W²=Wo²+2αθ
We need to find θ between 0sec to 2sec when the wheel stop
a. θ=Wot+1/2αt²
θ=24×2+1/2×30×2²
θ=48+60
θ=108rad.
b. W=Wo+αt
W=24+30×2
W=84rad/s
This is the final angular velocity which is the initial angular velocity when the wheel starts to decelerate.
Wo=84rad/sec
W=0rad/s, because the wheel stop at θ=432rad
Using W²=Wo²+2αθ
0²=84²+2×α×432
-84²=864α
α=-8.17rad/s²
It is negative because it is decelerating
Now, time taken for the wheel to stop
W=Wo+αt
0=84-8.17t
-84=-8.17t
Then t =10.29seconds.
a. θ=108rad
b. t =10.29seconds
c. α=-8.17rad/s²
likely due to the location.
