Answer:
this description is valid for mediadle displacement, bone is an acceptable description
Explanation:
The description of a person's position must be done with a position vector. These vectors must have magnitude, a given direction and a starting point.
In the description this has a starting point corner NO of pine and 675.
Each displacement occurs with respect to the previous one, indicating the magnitude of the displacement and its direction.
After analyzing this description is valid for mediadle displacement, bone is an acceptable description
Answer:
it will take 36.12 ms to reduce the capacitor's charge to 10 μC
Explanation:
Qi= C×V
then:
Vi = Q/C = 30μ/20μ = 1.5 volts
and:
Vf = Q/C = 10μ/20μ = 0.5 volts
then:
v = v₀e^(–t/τ)
v₀ is the initial voltage on the cap
v is the voltage after time t
R is resistance in ohms,
C is capacitance in farads
t is time in seconds
RC = τ = time constant
τ = 20µ x 1.5k = 30 ms
v = v₀e^(t/τ)
0.5 = 1.5e^(t/30ms)
e^(t/30ms) = 10/3
t/30ms = 1.20397
t = (30ms)(1.20397) = 36.12 ms
Therefore, it will take 36.12 ms to reduce the capacitor's charge to 10 μC.
<span>At this distance, and with an orbital speed of 24.077 km/s, Mars takes 686.971 Earth days, the equivalent of 1.88 Earth years, to complete a orbit around the Sun. This eccentricity is one of the most pronounced in the Solar System, with only Mercury having a greater one (0.205).
686.971 rounds to 687
HOPE I HELPED!</span>
Answer:
Three long wires are connected to a meter stick and hang down freely. Wire 1 hangs from the 50-cm mark at the center of the meter stick and carries 1.50 A of current upward. Wire 2 hangs from the 70-cm mark and carries 4.00 A of current downward. Wire 3 is to be attached to the meterstick and to carry a specific current, and we want to attach it at a location that results ineach wire experiencing no net force.
(a) Determine the position of wire 3.
b) Determine the magnitude and direction of current in wire 3
Explanation:
a) 
position of wire = 50 - 1.2
= 48.8cm
b) 
Direction ⇒ downward
Given constant acceleration, we can get the final position of an object in terms of both its initial velocity and its acceleration using one of the equations of motion.
The equation that we will use is:
Xf = Xi + Vi*t + (1/2)*a*t^2
where:
Xf is the final position of the object
Xi is the initial position of the object
Vi is the initial velocity of the object
t is the time
a is the constant given acceleration
