Which of the following is not true about intrusion detection systems (motion detectors, vibration sensors, light beams)?A. They
1 answer:
You might be interested in
The power that must be supplied to the motor is 136 hp
<u>Explanation:</u>
Given-
weight of the elevator, m = 1000 lb
Force on the table, F = 500 lb
Distance, s = 27 ft
Efficiency, ε = 0.65
Power = ?
According to the equation of motion:
F = ma
a = 16.1 ft/s²
We know,
To calculate the output power:
Pout = F. v
Pout = 3 (500) * 29.48
Pout = 44220 lb.ft/s
As efficiency is given and output power is known, we can calculate the input power.
ε = Pout / Pin
0.65 = 44220 / Pin
Pin = 68030.8 lb.ft/s
Pin = 68030.8 / 500 hp
= 136 hp
Therefore, the power that must be supplied to the motor is 136 hp
Rubber block is not shown. I have attached an image of it.
Answer:
A) ε_x = 0.0075
B) ε_y = 0.00375
C) γ_xy = 0.0122 rad
Explanation:
We are given;
δ = 0.03 in
L = 4 in
ν_r = 0.5
θ = 89.3° = 89.3π/180 rad
Let's calculate ε_x in the direction of axis x
Thus, ε_x = δ/L = 0.03/4 = 0.0075
Let's calculate ε_y in the direction of axis y;
ε_y = v•ε_x = 0.5 x 0.0075 = 0.00375
Now, shear strain is angle between π/2 rad surfaces at that point.
Thus,
γ_xy = π/2 - θ = π/2 - 89.3π/180
γ_xy = π(0.003889) = 0.0122 rad
Answer:
Part A: (d/D=0.1)
DeltaV percent=42.6%
Part B:(d/D=0.01)
DeltaV percent=21.7%
Explanation:
We are going to use the following volume flow rate equation:
Above equation can be written as:
First Consider no wire i.e d/D=0
Above expression will become:
Part A: (d/D=0.1)
DeltaV percent=42.6%
Part B:(d/D=0.01)
DeltaV percent=21.7%