Whipping is done in a forward direction. You deposit a dab or puddle of metal down, and then whip the rod forward and up a little to let that dab cool a bit, then you move back and deposit another dab slightly ahead of the previous dab.
Cellulose rod like 6010 and 6011 are known as "fast freeze" electrodes, also known to be deep penetrating rods. The "whip and stitch" motion is used so that you get the full benefit of the cellulose characteristics. The forward motion basically gouges out the base metal, and it gets filled in with the back-step.
Hope this helped:)
Answer:
The original length of the specimen is found to be 76.093 mm.
Explanation:
From the conservation of mass principal, we know that the volume of the specimen must remain constant. Therefore, comparing the volumes of both initial and final state as state 1 and state 2:
Initial Volume = Final Volume
πd1²L1/4 = πd2²L2/4
d1²L1 = d2²L2
L1 = d2²L2/d1²
where,
d1 = initial diameter = 19.636 mm
d2 = final diameter = 19.661 mm
L1 = Initial Length = Original Length = ?
L2 = Final Length = 75.9 mm
Therefore, using values:
L1 = (19.661 mm)²(75.9 mm)/(19.636 mm)²
<u>L1 = 76.093 mm</u>
Answer:
2102.1 m
Explanation:
Temperature at the equator = 0⁰
Radius of the earth = 6.37x10⁶
Required:
We how to find out what the clearance between tape and ground would be if temperature increases to 30 degrees.
Final temperature = ∆T = 303-273 = 30
S = 11x10^-6
The clearance R = Ro*S*∆T
=6.37x10⁶x 11x10^-6x30
= 2102.1m
Or 2.102 kilometers
Thank you
I believe it’s A bit I. could be wrong
Answer:
Explanation:
Your car's owner's manual will provide a maintenance schedule designed to keep your brakes in good condition. Following it is the easiest way to avoid expense repairs and the potential for catastrophic brake failure. But at the very least, you should have your brakes inspected every year.
