I don't really understand the meaning of the question. Can you reply and i'll try to help...
I believe your answer would be:
1: Open the command prompt window. Do this by clicking the "Start" button, and then selecting "Run." In the window that appears, type "cmd" into the text box and click the "OK" button.
2: Release the computer's current IP address. To do this, type "ipconfig /release" into the command prompt window and press Enter.
3: Acquire a new IP address. Do this by typing "ipconfig /renew" into the command prompt window and pressing Enter. This should assign the computer a new IP address, which will be different from the previous address.
4: Cycle your modem's power. If the above steps don't work, you can try renewing your IP address by cycling your modem's power. Turn off both your computer and your modem (and your router, if you have one). Wait at least 5 minutes, then turn everything back on. If your computer is set to receive an IP address dynamically (the most likely configuration), you should be assigned a new IP address automatically.
5: Check to make sure your IP address has changed. To do this, you can log on to a number of different websites that tell you your IP address.
Hope I helped, if so may I get brainliest and a thanks?
Thank you, Have a good day! =)
Sophia es un robot humanoide (ginoide) desarrollado por la compañía, con sede en Hong Kong, Hanson Robotics. Ha sido diseñada para aprender, adaptarse al comportamiento humano y trabajar con estos satisfactoriamente.
Answer:
writing code for a software program.
Explanation:
Software development life cycle (SDLC) can be defined as a strategic process or methodology that defines the key steps or stages for creating and implementing high quality software applications.
Some of the models used in the software development life cycle (SDLC) are; waterfall model, incremental model, spiral model, agile model, big bang model, and V-shaped model.
The five (5) standard stages of development in software development are;
I. Analysis.
II. Design.
III. Implementation (coding).
IV. Testing.
V. Maintenance.
A typical day in programming and software development would involve writing code for a software program.
Generally, software applications or programs require a code containing series of sequential instruction to perform specific tasks, commands and processes. These sets of code are typically written by a software developer (programmer).
