Answer:
d) Sugar and water
Explanation:
The sugar and water solution will have a clear and transparent outlook.
When we look at a solution of a mixture of sugar and water, it a homogenous one.
A homogenous solution have their solution in one phase.
The solute is sugar and the solvent is water.
The solution obtained is colorless therefore, light will pass through without any obstruction.
The other solutions will be translucent or opaque
Answer:
1.35 × 10⁴ kg/m³ at 22 °C; 1.34 × 10⁴ kg/m³ at 100 °C
Explanation:
The cubic expansivity (γ) of a liquid is the fractional change in volume per unit change in temperature.
Multiply by V₀ΔT and transpose
ΔV = γV₀ΔT
and
V = V₀ + ΔV
===============
<em>At 0 °C
</em>
Assume you have 1 m³ of Hg
ρ = m/V Multiply by V and transpose
m = ρV
ρ = 1.36 × 10⁴ kg/m³
m = 1.36 × 10⁴ × 1 = 1.36 × 10⁴ kg
===============
<em>At 22 °C
</em>
Assume that you have 1 m³ of Hg
γ = 180 × 10⁻⁶ K⁻¹
ΔT = 22 °C – 0 °C = 22 °C
ΔV = 180 × 10⁻⁶ × 22
ΔV = 3.96 × 10⁻³ m³ Calculate volume
V = 1 + 0.00396
V = 1.00396 m³ Calculate density
ρ = 1.36 × 10⁴/1.00396
ρ = 1.35 × 10⁴ kg/m³
===============
<em>At 100 °C
</em>
ΔT = 100 °C – 0 °C = 100 °C
ΔV = 180 × 10⁻⁶ × 100
ΔV = 0.0180 m³ Calculate volume
V = 1 + 0.0180
V = 1.0180 m³ Calculate density
ρ = 1.36 × 10⁴/1.0180
ρ = 1.34 × 10⁴ kg/m³
First, let us find the corresponding amount of moles H₂ assuming ideal gas behavior.
PV = nRT
Solving for n,
n = PV/RT
n = (6.46 atm)(0.579 L)/(0.0821 L-atm/mol-K)(45 + 273 K)
n = 0.143 mol H₂
The stoichiometric calculations is as follows (MW for XeF₆ = 245.28 g/mol)
Mass XeF₆ = (0.143 mol H₂)(1 mol XeF₆/3 mol H₂)(245.28 g/mol) = <em>11.69 g</em>
Answer:
Explanation:
People make and use alloys because metals don't have exactly the right properties for a job. usually, alloys are stronger and harder than their main metals, harder to work and less ductile (harder to pull into wires).
Answer:
D) Evaluating it with experimentation and argument.
Explanation:
If you don't have enough observational evidence, then you can't really strengthen your scientific knowledge, because you haven't collected enough information to answer the questions you're asking.
If you only have a few scientists working on a question, it will take longer to find an answer. With more people working on a concept, it can be solved in more time.
It can be good to create new hypotheses, but only if you've already tested your original hypothesis (with experimentation and argument), and it turned out to be wrong. Once you've rejected your first hypothesis, only then should you make a new one.
