Which type of mirror causes beams of light to spread apart

Copper and aluminum are being considered for a high-voltage transmission line that must carry a current of 60.7 A. The resistanc

lisov135 [29]

Answer:

a) The magnitude JJ of the current density for a copper cable is 5.91 × 10⁵A.m⁻²

b)The mass per unit length \lambdaλ for a copper cable is 0.757kg/m

c)The magnitude J of the current density for an aluminum cable is 3.5 × 10⁵A/m²

d)The mass per unit length \lambdaλ for an aluminum cable is 0.380kg/m

Explanation:

The expression for electric field of conductor is,

$E = \frac{V}{L}$

The general equation of voltage is,

V = iR

The expression for current density in term of electric field is,

$J = \frac{E}{p}$

Substitute (V/L) for E in the above equation of current density.

$J = \frac{V}{pL} ------(1)$

Substitute iR for V in equation (1)

$J = \frac{iR}{pL} ------(2)$

Substitute 1.69 × 10⁸ Ω .m for p

50A for i

0.200Ω.km⁻¹ for (R/L) in eqn (2)

$J = \frac{(50) (0.200\times 10^-^3) }{1.69 \times 10^-^8 } \\\\= 5.91 \times 10^5A.m^-^2$

The magnitude JJ of the current density for a copper cable is 5.91 × 10⁵A.m⁻²

b) The expression for resistivity of the conductor is,

$p = \frac{RA}{L}$

$A = \frac{pL}{R}$

The expression for mass density of copper is,

m = dV

where, V is the density of the copper.

Substitute AL for V in equation of the mass density of copper.

m=d(AL)

m/L = dA

λ is use for (m/L)

substitute,

pL/R for A and λ is use for (m/L) in the eqn above

$\lambda = d\frac{p}{\frac{R}{L} } ------(3)$

Substitute 0.200Ω.km⁻¹ for (R/L)

8960kgm⁻³ for d and 1.69 × 10⁸ Ω .m

$\lambda = (8960) \frac{(1.69 \times 10^-^8 }{0.200\times 10^-^3} \\\\= 0.757kg.m^-^1$

c) Using the equation (2) current density for aluminum cable is,

$J = \frac{iR}{pL}$

p is the resistivity of the aluminum cable.

Substitute 2.82 × 10⁻⁸Ω.m for p ,

50A for i and 0.200Ω.km⁻¹ for (R/L)

$J = \frac{(50)(0.200\times10^-^3) }{2.89\times 10^-^8} \\\\= 3.5 \times10^5A/m^2$

The magnitude J of the current density for an aluminum cable is 3.5 × 10⁵A/m²

d) Using the equation (3) mass per unit length for aluminum cable is,

$\lambda = d\frac{p}{\frac{R}{L} }$

p is the resistivity and is the density of the aluminum cable.

Substitute 0.200Ω.km⁻¹ for (R/L), 2700 for d and 2.82 × 10⁻⁸Ω.m for p

$\lambda = (2700) \frac{(2.82 \times 10^-^8) }{(0.200 \times 10^-^3) } \\\\= 0.380kg/m$

The mass per unit length \lambdaλ for an aluminum cable is 0.380kg/m

7 0

4 years ago

Read 2 more answers

A satellite in orbit is not truly traveling through a vacuum.It is moving through very, very thin air. Does the resulting airfri

defon

PART A) Yes, the fact that there is a frictional force acting on the satellite generates a loss of energy due to friction. What causes satellite to diminish its orbit during its tour. In fact, many satellites have rectifier systems that allow them to position themselves and remain in their orbit for a long time to avoid being trapped by the Earth's gravity Force and fall into the atmosphere where they would probably be torn apart.

PART B) As a similarity, one could start by mentioning the structure of the two equations are similar and have their own constants who were responsible for supporting them. While the law of gravity speaks of the masses of the bodies the electrostatic law speaks of the charges of the bodies. For both the force is inversely proportional to the square of the distance that separates them.

However, the most notable difference between them is basically their statement. While one of the equations speaks about greavedad the other reflects the electromagnetic phenomena. It should be noted that the force of gravity is much weaker than the electromagnetic force and that the latter has the capacity of attraction and repulsion. While the gravitational force only that of attraction.

4 0

4 years ago

A car with a mass of 1.5 × 103 kilograms is traveling west at a velocity of 22 meters/second. It hits a stationary car with a ma

Licemer1 [7]

A. 14 meters/second to the west

3 0

3 years ago

Read 2 more answers

Suppose the odometer on our car is broken and we want to estimate the distance driven over a 30 second time interval. We take th

Natalija [7]

Let say for every 5 s of time interval the speed will remain constant

so it is given as

v(mi/h) 16 21 23 26 33 30 28

now we have to convert the speed into ft/s as it is given that 1 mi/h = 5280/3600 ft/s

so here we will have

v(ft/s) 23.5 30.8 33.73 38.13 48.4 44 41.1

now for each interval of 5 s we will have to find the distance cover for above interval of time

$d = v \times t$

$d = (23.5 + 30.8 + 33.73 + 38.13 + 48.4 + 44 + 41.1) \times 5$

$d = 1298.1 ft$

so here it will cover 1298.1 ft distance in 30 s interval of time

4 0

3 years ago

Read 2 more answers

Most ocean waves obtain their energy and motion from _____. the moon's gravitational attraction the sun plate movement the wind

IrinaVladis [17]

Hello!

Most ocean waves obtain their energy and motion from the wind.

Ocean waves are surface waves that move across the surface of the ocean. When wind touches the surface of the water, there is friction in the contact zone. This friction causes a drag effect, that makes wrinkles on the surface of the water. As the wrinkles get bigger, they transform into full-blown waves, and the taller the wave, the more energy it can extract from the wind, making them even bigger and to move longer distances.

Have a nice day!

3 0

3 years ago