The answer is C, ROM often stores the basic instructions a computer needs when powering on, part if the BIOS.
Materials
materials are the only physical thing
Answer:
Time required is 0.007 s
Explanation:
As per the question:
Analog signal to digital bit stream conversion by Host A =64 kbps
Byte packets obtained by Host A = 56 bytes
Rate of transmission = 2 Mbps
Propagation delay = 10 ms = 0.01 s
Now,
Considering the packets' first bit, as its transmission is only after the generation of all the bits in the packet.
Time taken to generate and convert all the bits into digital signal is given by;
t = 
t = 
(Since, 1 byte = 8 bits)
t = 7 ms = 0.007 s
Time Required for transmission of the packet, t':
Answer and Explanation:
Backup control within the SAN is one which confines the backup to the SAN and does not pass it via corporate network.
Backup traffic within the SAN are easier to maintain and easily handled in contrast to the application server.
Backup in SAN is governed by such applications and mechanism which allows the easy handling of the backup traffic which is not provided by the application servers.
In case of occurrence of any failure, unlike application server, SAN provides smooth and fast migration
SAN holds data in cluster by the use of backup techniques not used in application server.
Answer:
A pneumatic system is a system that uses compressed air to transmit and control energy. Pneumatic systems are used extensively in various industries. Most pneumatic systems rely on a constant supply of compressed air to make them work. This is provided by an air compressor.
A hydraulic system is a drive technology where a fluid is used to move the energy from e.g. an electric motor to an actuator, such as a hydraulic cylinder. The fluid is theoretically uncompressible and the fluid path can be flexible in the same way as an electric cable.
Explanation:
<h3>Examples of pneumatic systems and components
</h3><h3>Air brakes on buses and trucks.
</h3><h3>Air brakes on trains.
</h3><h3>Air compressors.
</h3><h3>Air engines for pneumatically powered vehicles.
</h3><h3>Barostat systems used in Neurogastroenterology and for researching electricity.
</h3><h3>Cable jetting, a way to install cables in ducts.
</h3><h3>Dental drill.</h3>
<h3>Hydraulic systems use the pump to push hydraulic fluid through the system to create fluid power. The fluid passes through the valves and flows to the cylinder where the hydraulic energy converts back into mechanical energy. The valves help to direct the flow of the liquid and relieve pressure when needed.</h3>
