The most commonly accepted amount of colors on one slide is 4
Hey!
------------------------------------------
<h3>Answers:</h3>
Operating System
Web Browser
Word Processor
Device Driver
------------------------------------------
<h3>Explanation:</h3>
Software is a set of data that tells the computer what to do. Each of the answer above tell the computer something specific to do.
The operating system are basic functions that make the computer run smoothly.
The web browser is telling the computer you want to look something up like in internet explorer, firefox, and chrome.
The word processor is a piece of software that tells the computer that you want to format a piece of text like in Microsoft word.
The device driver is a piece of software that controls a connected device like a phone or another computer.
------------------------------------------
Hope This Helped! Good Luck!
Answer:
double the bandwidth assigned per channel to 40 MHz
Explanation:
The best way of doing this would be to double the bandwidth assigned per channel to 40 MHz. This will make sure that the capacity is more than sufficient. This is simply because the bandwidth of a channel represents how much information can pass through the channel at any given second, the larger the channel, the more information/data that can pass at the same time. Therefore, if 20 MHz is enough for the network, then doubling this bandwidth channel size would be more than sufficient capacity for the network to handle all of the data.
Answer:
Following are the steps with actions that are involved in required to perform a packet transfer.
Explanation:
- Step 1: The host sends a connection request to server which is at IP address 209.165.200.254
- Step 2: R1 check the configuration of NAT to inquire weather the packet should be translated or not.
- Step 3: If there is no entry found for translation of given IP address, It is assumed that the IP address 192.168.10.10 will be translated already.
- Step 4: R1 selects a global address from the dynamic address pool that is available to it.
- Step 5: R1 replaces the given IP address 192.168.10.10 with the translated inside global address.
i hope it will help you!
