6 penalties/8 penalties
16 min/21.3
Answer: The angle of elevation is 18.4 degrees (Approximately)
Step-by-step explanation: Please refer to the picture attached for more details.
The pole from top to bottom is 20 feet tall and is depicted as line FB. An observer is standing at a distance of 20 feet from the base of the pole, and that is depicted as line BA. The observer who is at point A looks up to the top of the flagpole at an angle of elevation shown as angle A.
Using angle A as the reference angle, line FB which is 20 feet would be the opposite (facing the reference angle), while line BA which is 60 feet would be the adjacent (that lies between the right angle and the reference angle).
Therefore, to calculate angle A;
Tan A = Opposite/Adjacent
Tan A = 20/60
Tan A = 1/3
Tan A = 0.3333
Checking with your calculator or table of values,
A = 18.4349°
Rounded to the nearest tenth,
A ≈ 18.4°
Y - 10 =(-1/3) ( X - 10 )
Y = ( -1/3) X + ( 40/3)
Step-by-step explanation:
Step 1:
The basic form of Slope Intercept equation is
Step 2:
Points are (10,10) and m=-1/3
Y-10 = (-1/3)(X-10)
Y = ( (-X + 10 )/3) + 10
Y =( - X / 3 ) +( 40 / 3)
Answer:
3/6 = 1/2 = 0.5
Step-by-step explanation:
3 / 6 = 1/2 = 0.5
Answer: The correct option is triangle GDC
Step-by-step explanation: Please refer to the picture attached for further details.
The dimensions give for the cube are such that the top surface has vertices GBCF while the bottom surface has vertices HADE.
A right angle can be formed in quite a number of ways since the cube has right angles on all six surfaces. However the question states that the diagonal that forms the right angle runs "through the interior."
Therefore option 1 is not correct since the diagonal formed in triangle BDH passes through two surfaces. Triangle DCB is also formed with its diagonal passing only along one of the surfaces. Triangle GHE is also formed with its diagonal running through one of the surfaces.
However, triangle GDC is formed with its diagonal passing through the interior as shown by the "zigzag" line from point G to point D. And then you have another line running from vertex D to vertex C.