You should point out to your customers that the turn signal stalk should be turned ON when they are about 100 feet away from an intersection.
<h3>What is a
turn signal stalk?</h3>
A turn signal stalk can be defined as a slender lever which is usually mounted on or near the steering wheel of an automobile vehicle, and it's used by a driver to control a signal or perform a function.
In conclusion, it is very important that you should point out to your customers that the turn signal stalk should be turned ON when they are about 100 feet away from an intersection.
Read more on an intersection here: brainly.com/question/22580476
#SPJ1
Answer:
0.39J/s
Explanation:
Length of 1 tube = 3.7m
Length of 400 tubes in the heat exchanger = 3.7×400 = 1480m, Temperature difference = 23°C = 296K
Outer surface
Rate of heat transfer = (heat transfer coefficient×area×log mean temperature difference)/length
diameter (d) = 25mm = 0.025m, area = πd^2/4 = (3.142×0.025^2)/4 = 0.000491m^2
Rate of heat transfer = (6820×0.000491×296)/1480 = 0.67J/s
Inner surface
diameter = 23mm = 0.023m, area = (3.142×0.023^2)/4 = 0.000416m^2
Rate of heat transfer = (3410×0.000416×296)/1480 = 0.28J/s
Heat transfer rate between the two surfaces = 0.67 - 0.28 = 0.39J/s
Answer:
nothing really you might just get a littlie shock but youll be fine
Explanation:
Answer:T = 167.3 N
Explanation:
Given that the
Weight mg = 110 N
The mass m of the ball will be
m = 110/9.8 = 11.22 kg
As the direction of the ball’s velocity is changing, the force responsible for this is centripetal force F. And
F = mV^2/r
Where
V = 5.0 m/s
r = L = 4.9 m
m = 11.22
Substitute all these parameters into the formula
F = (11.22 × 5^2)/4.9
F = 280.6/4.9
F = 57.27 N
Tension T = F + mg
Substitute F and mg into the formula
T = 57.27 + 110
T = 167.3 N
Therefore, the tension in the rope at that point is 167.3 N
Two types of inferred values used to indicate level measurements are hydrostatic pressure type and electrical type.