Physics- damon, Monday, December 1, 2014 at 3:27 pm force =change in momentum\ change in time or m a if m is constant
change in momentum/3=200
change in momentum =3*200 kg m/s
Answer:
A) Three hole punch and either a layered plastic or paper
B) Identify the lengths involved ,
Length of input arm / length of output arm = L1/ L2
Explanation:
<u>a) Materials involved includes :</u>
Three hole punch and either a layered plastic or paper
Identify the forces acting on the three-hole punch which are Input and output forces
Identify the points where they act
<u>B) procedures involved </u>
The mechanical advantage = output force / input force
step one: Identify the lengths involved
assuming no friction or relatively small friction \
mechanical advantage can be calculated as : Length of input arm / length of output arm = L1/ L2
Answer:
a)Q=71.4 μ C
b)ΔV' = 10.2 V
Explanation:
Given that
C ₁= 8.7 μF
C₂ = 8.2 μF
C₃ = 4.1 μF
The potential difference of the battery, ΔV= 34 V
When connected in series
1/C = 1/C ₁ + 1/C₂ + 1/C₃
1/ C= 1/8.4 +1 / 8.4 + 1/4.2
C=2.1 μF
As we know that when capacitor are connected in series then they have same charge,Q
Q= C ΔV
Q= 2.1 x 34 μ C
Q=71.4 μ C
b)
As we know that when capacitor are connected in parallel then they have same voltage difference.
Q'= C' ΔV'
C'= C ₁+C₂+C₃ (For parallel connection)
C'= 8.4 + 8.4 + 4.2 μF
C'=21 μF
Q'= C' ΔV'
Q'=3 Q
3 x 71.4= 21 ΔV'
ΔV' = 10.2 V
Answer:
B
Explanation:
You always want to test as many samples as possible
Collision domain is a portion in the network where there is a possibility of formation of packets. This occurs when two or more devices are able to send a packet to a single switch or port on the network that is shared, on the same time. It was noted that this collision domain reduces the efficiency of the network.
For this item, the first packet is the whole switch with the three devices. Next one would be first of the three devices that is connected to the other port. Similarly, the third one would be the second of the three devices that is also connected to the switch. Therefore, the answer is 3.
