General expression is;
Pressure = Force/Area
In which,
Pressure = Required pressure + Atmospheric pressure = (1.2*10^5) + (101325) = 221325 Pa = 221325 N/m^2
Area = πD^2/4 = π*0.035^2/4 = 9.621*10^-4 m^2
Therefore,
Force, F = Pressure*Area = 221325*9.621*10^-4 = 212.94 N
Answer:
Explanation:
Resistance is defined as the opposition to the flow of an electric current in a circuit. This means that a higher amount of resistance tends to reduce the amount of current flowing through the resistance. The lower the current, the greater the possibility for the resistor to allow current to pass through it. if a 200 Ω resistor was used in Circuit 1 instead of the 100 Ω resistor, then the current in the circuit will tends to increase since we are replacing the load with a lesser resistor and a smaller resistance tends to allow more current to flow through it
For the potential difference, a decrease in the resistance value will onl decrease the potential difference flowing in the circuit according to ohm's law. According to the law the pd in a circuit is directly proportional to the current which means an increase in the resistance value will cause an increase in the corresponding pd and vice versa.
Answer:
mass
Explanation:
As this is directly related to inertia. Inertia is the property of unit which resists the change of state of rest or motion
Answer:
Explanation:
As we know that the relation between temperature and pressure is a linear relation
so we have
here we know that
now we will have
now if P = 0
then we will have
Rocks leftover from planet or moon formation.
