3 years ago

Consider the following signal:

Engineering

1 answer:

AfilCa [17]3 years ago

4 0

Answer:

i still have no clue

Explanation:

You might be interested in

hellooooo guyssssddddddsss i was talking to some people help me find them if you are them tell me and tyyyyyyyyyyyyyyyyyyyyyyyyy

mash [69]

Huh

hmmm

Mmmmmmmmmmmmmm

5 0

3 years ago

Read 2 more answers

Degreasers can be broken down into two main categories

Alex17521 [72]

Degreasers can be categorized to be either water-based or solvent-based.

5 0

3 years ago

Read 2 more answers

A steel cylindrical pressure vessel has an inside diameter of 2m and a wall thickness of 2cm. If the steel has a yield stress Y

Feliz [49]

Answer:

The pressure that will cause yielding in the tank in the longitudinal direction is 1.7 Mpa

Explanation:

We are dealing with a thin-walled pressure vessel here.

the formula for calculating the hoops stress of this pressure vessel is $\sigma =P d/4t$

$\sigma Y =$ longitudinal yield stress = $425 \times 10^{6} Pa$

Thickness = 2/1000 =0.002m

Outside diameter = inside siameter + thickness = 2m + 0.002m= 2.002m

Dm = Mean diameter = Outside diameter - thickness = 2.002 - 0.002 = 2m

$P= 425 \times 10^{6} \times 4 \times 0.002 /2=1.7 Mpa$

4 0

3 years ago

Using the Distortion-Energy failure theory: 8. (5 pts) Calculate the hydrostatic and distortional components of the stress 9. (1

WITCHER [35]

Answer:

Detailed solution is given below:

7 0

4 years ago

Ceramics has the weakness of resisting high compression force but low tensile force. a)-True b)-False

Nesterboy [21]

Answer: b) False

Explanation:Ceramic is brittle in nature therefore it has a tendency that it is strong during the compression and it tends to be weak during the high tensile forces. While the tensile forces are applied , ceramics are not able to yield the stress and cause breakage of the material due to high tension but does not face any fault during the compression.

7 0

4 years ago