Answer:
D
Explanation:
Why is because the merry go round wont do anything cause he will stay the same speed.
Answer: High pass filters, and in particular LC high pass filters are used in many RF applications where they block the lower frequencies and allow through higher frequency signals. Typically LC filters are used for the higher radio frequencies where active filters are not so manageable, and inductors more appropriate.
Answer:
The thermal conductivity of the wall = 40W/m.C
h = 10 W/m^2.C
Explanation:
The heat conduction equation is given by:
d^2T/ dx^2 + egen/ K = 0
The thermal conductivity of the wall can be calculated using:
K = egen/ 2a = 800/2×10
K = 800/20 = 40W/m.C
Applying energy balance at the wall surface
"qL = "qconv
-K = (dT/dx)L = h (TL - Tinfinity)
The convention heat transfer coefficient will be:
h = -k × (-2aL)/ (TL - Tinfinty)
h = ( 2× 40 × 10 × 0.05) / (30-26)
h = 40/4 = 10W/m^2.C
From the given temperature distribution
t(x) = 10 (L^2-X^2) + 30 = 30°
T(L) = ( L^2- L^2) + 30 = 30°
dT/ dx = -2aL
d^2T/ dx^2 = - 2a
By definition,
q = 1.22y/D
Where,
q = min. angle
y = wavelength
D = Aperture diameter = diameter of the antenna
At distance "x" from the antenna,
L =xq = 1.22xy/D
Where, L = Min. distance
But, y =c/f = (3*10^8)/(16*10^9) = 0.01875 m
Substituting;
L = 1.22*5*10^3*0.01875/2.1 = 54.46 m
