Answer:
86 mm
Explanation:
From the attached thermal circuit diagram, equation for i-nodes will be
Equation 1
Similarly, the equation for outer node “o” will be
Equation 2
The conventive thermal resistance in i-node will be
Equation 3
The conventive hermal resistance per unit area is
Equation 4
The conductive thermal resistance per unit area is
Equation 5
Since
is given as 100,
is 40
is 300
is 25
Substituting the values in equations 3,4 and 5 into equations 1 and 2 we obtain
Equation 6
Equation 7
From equation 6 we can substitute wherever there’s
with 3000L+40 as seen in equation 7 hence we obtain
The above can be simplified to be
-3000L=1.665-260
Therefore, insulation thickness is 86mm
Answer:
0.234
Explanation:
True stress is ratio of instantaneous load acting on instantaneous cross-sectional area
σ = k × (ε)^n
σ = true stress
ε = true strain
k = strength coefficient
n = strain hardening exponent
ε = ( σ / k) ^1/n
take log of both side
log ε =
( log σ - log k)
n = ( log σ - log k) / log ε
n = (log 578 - log 860) / log 0.20 = 0.247
the new ε = ( 600 / 860)^( 1 / 0.247) = 0.234
Answer:

Explanation:
Density is defined as mass ler unit volume, expressed as

Where m is mass,
is density and v is the volume. For a sphere, volume is given as

Replacing this into the formula of density then

Given diameter of 2.24 in then the radius is 1.12 in. Substituting 0.82 lb for m then

Answer:
baking soda and vinegar dish soap
Explanation:
it will create a bubbles and let it sit for 3 hours and it will go away