Answer:
The space available will vary between 800 GB (100%) and 400 GB (50%) of the total disks, depending on the RAID level.
The OS will handle the RAID as a single disk.
Explanation:
Each RAID level implements parity and redundancy in a different way, so the amount of disks used for this extra information will reduce the space available for actual storage.
Usual RAID levels are:
<u>RAID 0:</u> does not implement any redundancy or parity, so you will have available 100% of the total storage: 8 x 100 GB = 800 GB
<u>RAID 1:</u> Duplicates all the information in one disk to a second disk. Space is reduced in half: 400 GB
<u>RAID 5:</u> Uses the equivalent of 1 disk of parity data distributed evenly on each disk, meaning the space available is
of the total disks:
of 800 GB = 700 GB
Writting and reading the information on a RAID storage is handled by a raid controller, either implemented in hardware or software. The OS will "see" a single disk and will read or write information as usual.
Hello <span>Areyano7475
</span>
Question: T<span>he term drive app is used to describe applications stored on a computer true or false
Answer: False
Hope this helps
-Chris</span>
Answer:
shutdown -h +15 It is time for a shutdown!
Explanation:
In a work environment where there is an admin and users connected to the server when the admin wants to Give a 15-minute delay to allow users enough time to save their work data and logout from the system. the command above shuts down after 15 minutes delay and notifies the user with "It is time to shut down!".
Answer:
void printArray(int [],int);
Hope this helps!