All categories

3 years ago

Need help please!!!!!!!!!!!!!!!!!

Physics

1 answer:

DaniilM [7]3 years ago

3 0

Answer:

3 times

Explanation:

F=GMm/^2

if M is tripled,

F'=G3Mm/r^2

→F'=3F

You might be interested in

A wire is stretched just to its breaking point by a force F . A longer wire made of the same material has the same diameter. The

ICE Princess25 [194]

Answer: No

Explanation:

The force F required is equal to the Force exerted in stretching the first material since conditions are the same

8 0

3 years ago

Read 2 more answers

Difference between derived quantity and physical quantity

Lerok [7]

Answer:

<h2>Derived quantities are based on fundamental quantities, and they can be given in terms of fundamental quantities.</h2>

<h3>Fundamental quantities are the base quantities of a unit system, and they are defined independent of the other quantities. </h3>

Explanation:

#Let's Study

#I Hope It's Helps

#Keep On Learning

#Carry On Learning

$\\ \blue{MaggieEve}$

6 0

3 years ago

The Stronger the force that is exerted on an object,the ____ the change in velocity will be.

leonid [27]

osisisksj

#sorryneedpoints

5 0

3 years ago

Read 2 more answers

At t=0 a grinding wheel has an angular velocity of 25.0 rad/s. It has a constant angular acceleration of 26.0 rad/s2 until a cir

Agata [3.3K]

Answer:

a) The total angle of the grinding wheel is 569.88 radians, b) The grinding wheel stop at t = 12.354 seconds, c) The deceleration experimented by the grinding wheel was 8.780 radians per square second.

Explanation:

Since the grinding wheel accelerates and decelerates at constant rate, motion can be represented by the following kinematic equations:

$\theta = \theta_{o} + \omega_{o}\cdot t + \frac{1}{2}\cdot \alpha \cdot t^{2}$

$\omega = \omega_{o} + \alpha \cdot t$

$\omega^{2} = \omega_{o}^{2} + 2 \cdot \alpha \cdot (\theta-\theta_{o})$

Where:

$\theta_{o}$ , $\theta$ - Initial and final angular position, measured in radians.

$\omega_{o}$ , $\omega$ - Initial and final angular speed, measured in radians per second.

$\alpha$ - Angular acceleration, measured in radians per square second.

$t$ - Time, measured in seconds.

Likewise, the grinding wheel experiments two different regimes:

1) The grinding wheel accelerates during 2.40 seconds.

2) The grinding wheel decelerates until rest is reached.

a) The change in angular position during the Acceleration Stage can be obtained of the following expression:

$\theta - \theta_{o} = \omega_{o}\cdot t + \frac{1}{2}\cdot \alpha \cdot t^{2}$

If $\omega_{o} = 25\,\frac{rad}{s}$ , $t = 2.40\,s$ and $\alpha = 26\,\frac{rad}{s^{2}}$ , then:

$\theta-\theta_{o} = \left(25\,\frac{rad}{s} \right)\cdot (2.40\,s) + \frac{1}{2}\cdot \left(26\,\frac{rad}{s^{2}} \right)\cdot (2.40\,s)^{2}$

$\theta-\theta_{o} = 134.88\,rad$

The final angular angular speed can be found by the equation:

$\omega = \omega_{o} + \alpha \cdot t$

If $\omega_{o} = 25\,\frac{rad}{s}$ , $t = 2.40\,s$ and $\alpha = 26\,\frac{rad}{s^{2}}$ , then:

$\omega = 25\,\frac{rad}{s} + \left(26\,\frac{rad}{s^{2}} \right)\cdot (2.40\,s)$

$\omega = 87.4\,\frac{rad}{s}$

The total angle that grinding wheel did from t = 0 s and the time it stopped is:

$\Delta \theta = 134.88\,rad + 435\,rad$

$\Delta \theta = 569.88\,rad$

The total angle of the grinding wheel is 569.88 radians.

b) Before finding the instant when the grinding wheel stops, it is needed to find the value of angular deceleration, which can be determined from the following kinematic expression:

$\omega^{2} = \omega_{o}^{2} + 2 \cdot \alpha \cdot (\theta-\theta_{o})$

The angular acceleration is now cleared:

$\alpha = \frac{\omega^{2}-\omega_{o}^{2}}{2\cdot (\theta-\theta_{o})}$

Given that $\omega_{o} = 87.4\,\frac{rad}{s}$ , $\omega = 0\,\frac{rad}{s}$ and $\theta-\theta_{o} = 435\,rad$ , the angular deceleration is:

$\alpha = \frac{ \left(0\,\frac{rad}{s}\right)^{2}-\left(87.4\,\frac{rad}{s} \right)^{2}}{2\cdot \left(435\,rad\right)}$

$\alpha = -8.780\,\frac{rad}{s^{2}}$

Now, the time interval of the Deceleration Phase is obtained from this formula:

$\omega = \omega_{o} + \alpha \cdot t$

$t = \frac{\omega - \omega_{o}}{\alpha}$

If $\omega_{o} = 87.4\,\frac{rad}{s}$ , $\omega = 0\,\frac{rad}{s}$ and $\alpha = -8.780\,\frac{rad}{s^{2}}$ , the time interval is:

$t = \frac{0\,\frac{rad}{s} - 87.4\,\frac{rad}{s} }{-8.780\,\frac{rad}{s^{2}} }$

$t = 9.954\,s$

The total time needed for the grinding wheel before stopping is:

$t_{T} = 2.40\,s + 9.954\,s$

$t_{T} = 12.354\,s$

The grinding wheel stop at t = 12.354 seconds.

c) The deceleration experimented by the grinding wheel was 8.780 radians per square second.

4 0

4 years ago

7. Katie and her best friend liam play tennis every saturday morning. When katie serves the ball to liam, it travels 9.5 meters

Ksenya-84 [330]

Answer:

The velocity of the tennis ball is 4.52 m/s.

Explanation:

Given that,

The distance covered by ball, d = 9.5 meters (due south)

Time, t = 2.1 sec

Let v is the velocity of the tennis ball. We know that the velocity of an object is given by the total distance covered divided by total time taken. It is given by :

$v=\dfrac{d}{t}\\\\v=\dfrac{9.5\ m}{2.1\ s}\\\\v=4.52\ m/s$

So, the velocity of the tennis ball is 4.52 m/s. Hence, this is the required solution.

6 0

3 years ago