Typical journal-to-bearing clearance is......

luda_lava [24]

Answer:

u will need good car parts and a very well made engine

Explanation:

u need a good engine because if u only work on the outer layer of the car the inner parts will be slow and old and the car will have problems

5 0

3 years ago

Technician A says that acid core solder should be used whenever aluminum wires are to be soldered.

Lyrx [107]

A is correct because when you go to use core solder the aluminum wires will soldered.

3 0

3 years ago

Computer system analyst advantage

Vlad1618 [11]

Answer:

They help an organization realize the maximum benefit from its investment in equipment, personnel, and business processes. They use and analyze systems, interpret data, and customize systems to better meet the organization's needs.

Explanation:

brainliest plz

4 0

3 years ago

Read 2 more answers

A 860 kΩ resistor has 34 μA of current. What is the supply voltage for this electric circuit?

Juliette [100K]

Explanation:

first changing kilo ohm to ohm

860000 = 860 kΩ

and change 34 micro ampare to ampare

34 μA=3.4×10^-5

recalling the equation V=I*R

V= 3.4×10^-5×860000

v=29.24

8 0

3 years ago

Read 2 more answers

A charge of +2.00 μC is at the origin and a charge of –3.00 μC is on the y axis at y = 40.0 cm . (a) What is the potential at po

Nimfa-mama [501]

a) Potential in A: -2700 V

b) Potential difference: -26,800 V

c) Work: $4.3\cdot 10^{-15} J$

Explanation:

a)

The electric potential at a distance r from a single-point charge is given by:

$V(r)=\frac{kq}{r}$

where

$k=8.99\cdot 10^9 Nm^{-2}C^{-2}$ is the Coulomb's constant

q is the charge

r is the distance from the charge

In this problem, we have a system of two charges, so the total potential at a certain point will be given by the algebraic sum of the two potentials.

Charge 1 is

$q_1=+2.00\mu C=+2.00\cdot 10^{-6}C$

and is located at the origin (x=0, y=0)

Charge 2 is

$q_2=-3.00 \mu C=-3.00\cdot 10^{-6}C$

and is located at (x=0, y = 0.40 m)

Point A is located at (x = 0.40 m, y = 0)

The distance of point A from charge 1 is

$r_{1A}=0.40 m$

So the potential due to charge 2 is

$V_1=\frac{(8.99\cdot 10^9)(+2.00\cdot 10^{-6})}{0.40}=+4.50\cdot 10^4 V$

The distance of point A from charge 2 is

$r_{2A}=\sqrt{0.40^2+0.40^2}=0.566 m$

So the potential due to charge 1 is

$V_2=\frac{(8.99\cdot 10^9)(-3.00\cdot 10^{-6})}{0.566}=-4.77\cdot 10^4 V$

Therefore, the net potential at point A is

$V_A=V_1+V_2=+4.50\cdot 10^4 - 4.77\cdot 10^4=-2700 V$

b)

Here we have to calculate the net potential at point B, located at

(x = 0.40 m, y = 0.30 m)

The distance of charge 1 from point B is

$r_{1B}=\sqrt{(0.40)^2+(0.30)^2}=0.50 m$

So the potential due to charge 1 at point B is

$V_1=\frac{(8.99\cdot 10^9)(+2.00\cdot 10^{-6})}{0.50}=+3.60\cdot 10^4 V$

The distance of charge 2 from point B is

$r_{2B}=\sqrt{(0.40)^2+(0.40-0.30)^2}=0.412 m$

So the potential due to charge 2 at point B is

$V_2=\frac{(8.99\cdot 10^9)(-3.00\cdot 10^{-6})}{0.412}=-6.55\cdot 10^4 V$

Therefore, the net potential at point B is

$V_B=V_1+V_2=+3.60\cdot 10^4 -6.55\cdot 10^4 = -29,500 V$

So the potential difference is

$V_B-V_A=-29,500 V-(-2700 V)=-26,800 V$

c)

The work required to move a charged particle across a potential difference is equal to its change of electric potential energy, and it is given by

$W=q\Delta V$

where

q is the charge of the particle

$\Delta V$ is the potential difference

In this problem, we have:

$q=-1.6\cdot 10^{-19}C$ is the charge of the electron

$\Delta V=-26,800 V$ is the potential difference

Therefore, the work required on the electron is

$W=(-1.6\cdot 10^{-19})(-26,800)=4.3\cdot 10^{-15} J$

4 0

3 years ago