Question
Determine the average water exit velocity
Answer:
53.05 m/s
Explanation:
Given information
Volume flow rate, 
Diameter d= 8cm= 0.08 m
Assumptions
- The flow is jet flow hence momentum-flux correction factor is unity
- Gravitational force is not considered
- The flow is steady, frictionless and incompressible
- Water is discharged to the atmosphere hence pressure is ignored
We know that Q=AV and making v the subject then
where V is the exit velocity and A is area
Area, 
where d is the diameter
By substitution
To convert v to m/s from m/s, we simply divide it by 60 hence
Answer:
The level of service of of compound grade freeway is LOSB.
Explanation:
Find the provided attachments for explanation
Answer:
Suction and exhaust processes do not affect the performance of Otto cycle.
Explanation:
Step1
Inlet and exhaust flow processes are not including in the Otto cycle because the effect and nature of both the process are same in opposite direction.
Step2
Inlet process or the suction process is the process of suction of working fluid inside the cylinder. The suction process is the constant pressure process. The exhaust process is the process of exhaust out at constant pressure.
Step3
The suction and exhaust process have same work and heat in opposite direction. So, net effect of suction and exhaust processes cancels out. The suction and exhaust processes are shown below in P-V diagram of Otto cycle:
Process 0-1 is suction process and process 1-0 is exhaust process.
Answer:
the police officer cruise each streets precisely once and he enters and exit with the same gate.
Explanation:
NB: kindly check below for the attached picture.
The term ''Euler circuit'' can simply be defined as the graph that shows the edge of K once in a finite way by starting and putting a stop to it at the same vertex.
The term "Hamiltonian Circuit" is also known as the Hamiltonian cycle which is all about a one time visit to the vertex.
Here in this question, the door is the vertex and the road is the edge.
The information needed to detemine a Euler circuit and a Hamilton circuit is;
"the police officer cruise each streets precisely once and he enters and exit with the same gate."
Check attachment for each type of circuit and the differences.
Answer:
90 degrees
Explanation:
In the case when the sheer stress acts in the one plane of an element so it should be equal and opposite also the shear stress acted on a plan i.e. 90 degrees from the plane
Therefore as per the given situation it should be 90 degrees from the plane
hence, the same is to be considered and relevant too
