Answer:
B. Fuser unit
Explanation:
Based on the scenario that is being described it can be said that the most likely problem is the Fuser unit. This is a part that plays an important role in the printing process. This unit melts the toner and compresses it in order to leave the impression on the paper with heat. A faulty fuser unit will not compress correctly and leave wet ink on the paper causing it to smear.
Answer:
I believe the answer is B
Explanation:
Answer:
B) Developer is poured down the drain while fixer can be reduced
Explanation:
The effluents produced during photographic processing includes, wash water, bleach, fixer, and developer
The developer is an alkaline solution, with a pH of approximately 10.0, while the pH of the fixer is about 4.3, it is therefore, acidic
The rate of discharge of the developer to the fixer is 2 to 1, and the exhausted developer, fixer and process effluents combined are neutral and can be handle by the the treatment works and the drain pipes
Fixer which remain clear can be reused for more than a day, while the spent basic Developer and the acidic Spent Stop Bath can be combined to form a neutral solution, having a pH of approximately 7, which make them less hazardous to be disposed off down the sink into the drain
Therefore, <em>developer is poured down the drain while fixer can be reused</em>
Answer:
You have to like it to be successful in photography.
Explanation:
