3 years ago

What must be done first when inspecting the hydraulic brake system?

1 answer:

6 0

Answer:

The first step in a brake inspection is to investigate the illuminated ABS or Brake light using a scanning tool. The ABS or Brake light can mean numerous things depending on the make or model of the vehicle. Physical inspections should begin with the fluid level. Low fluid usually indicates worn pads.

Explanation:

You might be interested in

What is the resolution limit for a projection type of photolithographic system if the incident wavelength is 365 nm (the i-line

Vadim26 [7]

Answer:

Depth of field = 347.619 nm

Explanation:

wavelenght = 365nm

N.A =0.63

k1= 0.6

so we have that the resolution limit is:

R=k1*A

R=0.6*365

R=219 nm

and the Depth of field needed for the best resolution is:

DoF = Resolution / N.A.

DoF= R/N.A

DoF= 219/0.63

DoF= 347.619 nm

7 0

3 years ago

Which is a drawback of solar energy

alexira [117]

Answer:

Drawbacks include that it is costlier than other clean energies. Another thing is that when it isnt sunny you wont get as much energy

8 0

3 years ago

Engine oil flows through a 25‐mm‐diameter tube at a rate of 0.5 kg/s. The oil enters the tube at a temperature of 25°C, while th

Elodia [21]

Answer:

a) the log mean temperature difference (Approx. 64.5 deg C)

b) the rate of heat addition into the oil.

The above have been solved for in the below workings

Explanation:

3 0

4 years ago

25 points and brainliest is it A, B, C, D

Bogdan [553]

Answer:

SIR IT IS D HOPE THIS HELPS (☞ﾟヮﾟ)☞☜(ﾟヮﾟ☜)

Explanation:

4 0

3 years ago

Read 2 more answers

During experiments on laser etching of microchips for IBM, a nuclear engineer places a discshaped sample 5 mm in diameter in a v

Andru [333]

Answer:

Steady state temperature is approximately 801K

Explanation:

Detailed explanation and calculation is shown in the images below.

7 0

4 years ago