Answer:
0.4488 mm
Explanation:
Number of teeth in spur gear = 65
Number of teeth in pinion = 32
Diametral pitch = 7 = P
pressure angle = ∅ = 20°
Circular pitch of measured on the pitch circle is defined as the distance between two corresponding points.
Circular pitch
So, the circular pitch is 0.4488 mm
Answer:
The application of force is the main difference between truss and frame.
Explanation:
<u>Truss: </u>
Truss is a collection of beams,which use to handle the tensile and compression loads . That collection of beams creates rigid structure.
The load on the truss will be acting always at the at the hinge. Truss is widely used in the construction areas.
<u>Frame:</u>
Like truss, it is also a combination of beams and used to handle the loads. The main difference between truss and frame is the application of load. In the frame load can apply at the any point of the member of frame along with hinge.
Truss are connected by pin joint and can not transfer moment ,on the other hand frames are connected by rigid joint like welding so frame can transfer moment.
Truss and frame both forms a rigid structure and is used in the construction areas.
Answer: Symbol rate, Fs = 0.846
Explanation:
The attachment below shows the calculations
Answer:
velocity is 15.083 m/s
Explanation:
given data
length L = 1 m
Laminar to turbulent flow
xc = 0.5 m
Reynolds number Rex, c = 5 ×
solution
we take here for 350 K
= 1.81 ×
and here Reynolds number Rex, is express as
Rex = ................1
put here value at x = 0.5
5 × =
solve it we get
v = 15.083 m/s
so velocity is 15.083 m/s
