Answer:
A. f/2.8
Explanation:
A hole within a lens, through which light travels into the camera body is referred to as the APERTURE.
It is typically expressed as "f number" in photography. Basically, a fast lens is any lens with a maximum aperture of f/4 or more i.e f/2.8 , f/1.8 , f/1.4 etc.
The smaller the number is the bigger the maximum aperture is. Hence, the bigger the maximum aperture the more light that your lens will allow in.
Therefore, the ideal aperture settings for a fast lens is f/2.8
I would do A, as it would be better to use it and would make a good profit handling the assets
I believe your answer would be:
1: Open the command prompt window. Do this by clicking the "Start" button, and then selecting "Run." In the window that appears, type "cmd" into the text box and click the "OK" button.
2: Release the computer's current IP address. To do this, type "ipconfig /release" into the command prompt window and press Enter.
3: Acquire a new IP address. Do this by typing "ipconfig /renew" into the command prompt window and pressing Enter. This should assign the computer a new IP address, which will be different from the previous address.
4: Cycle your modem's power. If the above steps don't work, you can try renewing your IP address by cycling your modem's power. Turn off both your computer and your modem (and your router, if you have one). Wait at least 5 minutes, then turn everything back on. If your computer is set to receive an IP address dynamically (the most likely configuration), you should be assigned a new IP address automatically.
5: Check to make sure your IP address has changed. To do this, you can log on to a number of different websites that tell you your IP address.
Hope I helped, if so may I get brainliest and a thanks?
Thank you, Have a good day! =)
Answer:
C. Use the help feature
Explanation:
The help feature in the MS word is the quickest access to getting real time assistance when working on a project.