Pivot table is the answer
Answer:
Encoding is the process in which the digital or analog data are converted into digital signal. Encoding are used for efficient transmission and storage purpose by putting in the form of sequence of various number and characters.
There are basically three types of encoding:
- Semantic encoding
- Visual encoding
- Acoustic encoding
Modulating is the process of encoding the information in a transmitted signal and converting the digital or analog data into analog signals. It is widely used in long distance communication. In modulating process, modulator is the device that are capable of modulating carrier signal.
Answer:
FULL neighbor state.
(FULL/DR or FULL/BDR)
Explanation:
The fact that the routers are neighbors is not enough to guarantee an exchange of link status updates; they must form adjacencies to exchange link status updates. Adjacency is the next step after the process of establishing neighbors. Adjacent routers are routers that go beyond a simple Greeting exchange and act in the database exchange process. To reduce the amount of information exchange in a given segment, OSPF selects a router as a designated router (DR) and a router as a designated backup router (BDR) in each multiple access segment. The BDR is chosen as the backup mechanism in case the DR fails. The idea behind this is that routers have a central point of contact for the exchange of information. In order to verify if two routers have established an adjacency, you can use the command: show ip ospf neighbor.
Here is an example:
R1#show ip ospf neighbor
Neighbor ID Pri State Dead Time Address Interface
203.250.12.1 1 2WAY/DROTHER 0:00:37 203.250.14.3 Ethernet0
203.250.15.1 1 FULL/DR 0:00:36 203.250.14.2 Ethernet0
203.250.13.41 1 FULL/BDR 0:00:34 203.250.14.1 Ethernet0
Answer:
if you give me brainliest i will answer your question
Explan
