All categories

3 years ago

How/is climate change/human interaction affecting mutualism

1 answer:

4 0

Most mutualisms involve partnerships between ectothermic organisms. Therefore, they are particularly sensitive to changes in temperature, and most will be strongly affected by climate change. A mutualism will retain stability and function only under a particular set of environmental conditions.

You might be interested in

At the outer edge of a rotating space habitat, 130 m from the center, the rotational acceleration is g. What is the rotational a

enyata [817]

Answer:

Explanation:

Given:

R1 = 130 m

R2 = 65 m

w^2R = g

Assume, g = 9.81 m/s^2

w^2 = 9.81/130

w = 0.275 rad/s

At R2 = 65 m

g = w^2R

= (0.275^2) × 65

= 4.905 m/s^2

In conclusion,

g × R = k

g1/R1 = g2/R2

g2 = (g1 × 65)/130

= g1 ×1/2

= g1/2

6 0

3 years ago

What is its maximum altitude above the ground? The answer is the maximum height above the ground

Kisachek [45]

Answer:

Maximum altitude above the ground = 1,540,224 m = 1540.2 km

Explanation:

Using the equations of motion

u = initial velocity of the projectile = 5.5 km/s = 5500 m/s

v = final velocity of the projectile at maximum height reached = 0 m/s

g = acceleration due to gravity = (GM/R²) (from the gravitational law)

g = (6.674 × 10⁻¹¹ × 5.97 × 10²⁴)/(6370000²)

g = -9.82 m/s² (minus because of the direction in which it is directed)

y = vertical distance covered by the projectile = ?

v² = u² + 2gy

0² = 5500² + 2(-9.82)(y)

19.64y = 5500²

y = 1,540,224 m = 1540.2 km

Hope this Helps!!!

3 0

4 years ago

I need help with life a child is adopted and I’m a duck where is my left shoe

Pavel [41]

just swim In water and find your shoe

8 0

3 years ago

Read 2 more answers

Give me the ans of this plsss

MissTica

vib. motion motion of wire of guitar

circular motion revolution of earth around sun

1ml 1cm3

1m3 100cm3

volume of liquid measuring cylinder

5 0

3 years ago

Continuous and aligned fiber-reinforced composite with cross-sectional area of 340 mm2 (0.53 in.2) is subjected to a longitudina

Alecsey [184]

(a) 23.4

The fiber-to-matrix load ratio is given by

$\frac{F_f}{F_m}=\frac{E_f V_f}{E_m V_m}$

where

$E_f = 131 GPa$ is the fiber elasticity module

$E_m = 2.4 GPa$ is the matrix elasticity module

$V_f=0.3$ is the fraction of volume of the fiber

$V_m=0.7$ is the fraction of volume of the matrix

Substituting,

$\frac{F_f}{F_m}=\frac{(131 GPa)(0.3)}{(2.4 GPa)(0.7)}=23.4$ (1)

(b) 44,594 N

The longitudinal load is

F = 46500 N

And it is sum of the loads carried by the fiber phase and the matrix phase:

$F=F_f + F_m$ (2)

We can rewrite (1) as

$F_m = \frac{F_f}{23.4}$

And inserting this into (2):

$F=F_f + \frac{F_f}{23.4}$

Solving the equation, we find the actual load carried by the fiber phase:

$F=F_f (1+\frac{1}{23.4})\\F_f = \frac{F}{1+\frac{1}{23.4}}=\frac{46500 N}{1+\frac{1}{23.4}}=44,594 N$

(c) 1,906 N

Since we know that the longitudinal load is the sum of the loads carried by the fiber phase and the matrix phase:

$F=F_f + F_m$ (2)

Using

F = 46500 N

$F_f = 44594 N$

We can immediately find the actual load carried by the matrix phase:

$F_m = F-F_f = 46,500 N - 44,594 N=1,906 N$

(d) 437 MPa

The cross-sectional area of the fiber phase is

$A_f = A V_f$

where

$A=340 mm^2=340\cdot 10^{-6}m^2$ is the total cross-sectional area

Substituting $V_f=0.3$ , we have

$A_f = (340\cdot 10^{-6} m^2)(0.3)=102\cdot 10^{-6} m^2$

And the magnitude of the stress on the fiber phase is

$\sigma_f = \frac{F_f}{A_f}=\frac{44594 N}{102\cdot 10^{-6} m^2}=4.37\cdot 10^8 Pa = 437 MPa$

(e) 8.0 MPa

The cross-sectional area of the matrix phase is

$A_m = A V_m$

where

$A=340 mm^2=340\cdot 10^{-6}m^2$ is the total cross-sectional area

Substituting $V_m=0.7$ , we have

$A_m = (340\cdot 10^{-6} m^2)(0.7)=238\cdot 10^{-6} m^2$

And the magnitude of the stress on the matrix phase is

$\sigma_m = \frac{F_m}{A_m}=\frac{1906 N}{238\cdot 10^{-6} m^2}=8.0\cdot 10^6 Pa = 8.0 MPa$

(f) $3.34\cdot 10^{-3}$

The longitudinal modulus of elasticity is

$E = E_f V_f + E_m V_m = (131 GPa)(0.3)+(2.4 GPa)(0.7)=41.0 Gpa$

While the total stress experienced by the composite is

$\sigma = \frac{F}{A}=\frac{46500 N}{340\cdot 10^{-6}m^2}=1.37\cdot 10^8 Pa = 0.137 GPa$

So, the strain experienced by the composite is

$\epsilon=\frac{\sigma}{E}=\frac{0.137 GPa}{41.0 GPa}=3.34\cdot 10^{-3}$

3 0

3 years ago