All categories

3 years ago

Most cylinder wear occurs at the top of ring travel true or false

Engineering

1 answer:

sweet [91]3 years ago

8 0

Answer:

true

I hope it helps mate

I will always help you understanding your assingments

enjoy your day

#Captainpower:)

You might be interested in

To find the reactance XLXLX_L of an inductor, imagine that a current I(t)=I0sin(ωt)I(t)=I0sin⁡(ωt) , is flowing through the indu

Sophie [7]

Answer:

V(t) = XLI₀sin(π/2 - ωt)

Explanation:

According to Maxwell's equation which is expressed as;

V(t) = dФ/dt ........(1)

Magnetic flux Ф can also be expressed as;

Ф = LI(t)

Where

L = inductance of the inductor

I = current in Ampere

We can therefore Express Maxwell equation as:

V(t) = dLI(t)/dt ....... (2)

Since the inductance is constant then voltage remains

V(t) = LdI(t)/dt

In an AC circuit, the current is time varying and it is given in the form of

I(t) = I₀sin(ωt)

Substitutes the current I(t) into equation (2)

Then the voltage across inductor will be expressed as

V(t) = Ld(I₀sin(ωt))/dt

V(t) = LI₀ωcos(ωt)

Where cos(ωt) = sin(π/2 - ωt)

Then

V(t) = ωLI₀sin(π/2 - ωt) .....(3)

Because the voltage and current are out of phase with the phase difference of π/2 or 90°

The inductive reactance XL = ωL

Substitute ωL for XL in equation (3)

Therefore, the voltage across inductor is can be expressed as;

V(t) = XLI₀sin(π/2 - ωt)

3 0

4 years ago

Consider a dip-coating process where a very long (assume infinitely long) wire(solid) with radius, ri, is being pulled verticall

Gekata [30.6K]

Answer:

See explaination and attachment.

Explanation:

Navier-Stokes equation is to momentum what the continuity equation is to conservation of mass. It simply enforces F=ma in an Eulerian frame.

The starting point of the Navier-Stokes equations is the equilibrium equation.

The first key step is to partition the stress in the equations into hydrostatic (pressure) and deviatoric constituents.

The second step is to relate the deviatoric stress to viscosity in the fluid.

The final step is to impose any special cases of interest, usually incompressibility.

Please kindly check attachment for step by step solution.

6 0

4 years ago

For which of the following structures would a pile foundation be appropriate? (Select all that apply.)

tiny-mole [99]

Answer:

Football stadium on rocky soil

Skyscraper on bedrock

Apartment building on sandy soil

Explanation:

6 0

3 years ago

Refrigerant-134a at 700 kPa, 70°C, and 7.2 kg/min is cooled by water in a condenser until it exists as a saturated liquid at the

alex41 [277]

Answer:

The mass flow rate of cooling water required to cool the refrigerant is $123.788\,\frac{kg}{min}$ .

Explanation:

A condenser is a heat exchanger used to cool working fluid (Refrigerant 134a) at the expense of cooling fluid (water), which works usually at steady state. Let suppose that there is no heat interactions between condenser and surroundings.The condenser is modelled after the First Law of Thermodynamics, which states:

$\dot Q_{ref} - \dot Q_{w} = 0$

$\dot Q_{ref} = \dot Q_{w}$

$\dot m_{ref}\cdot (h_{ref, in} - h_{ref,out}) = \dot m_{w}\cdot (h_{w, out} - h_{w,in})$

The mass flow rate of the cooling water is now cleared:

$\dot m_{w} = \dot m_{ref }\cdot \frac{h_{ref,in}-h_{ref,out}}{h_{w,out}-h_{w,in}}$

Given that $h_{ref,in} = 808.34\,\frac{kJ}{kg}$ , $h_{ref, out} = 88.82\,\frac{kJ}{kg}$ , $h_{w,out} = 104.83\,\frac{kJ}{kg}$ and $h_{w,in} = 62.98\,\frac{kJ}{kg}$ , the mass flow of the cooling water is:

$\dot m_{w} = \left(7.2\,\frac{kg}{min} \right)\cdot \left(\frac{808.34\,\frac{kJ}{kg}-88.82\,\frac{kJ}{kg} }{104.83\,\frac{kJ}{kg}-62.98\,\frac{kJ}{kg} } \right)$