It is formed by the impact of meteorites on the body’s surface. The force of the collision melts some of the impacted regolith to form objects.
when approaching the front of an idling jet engine, the hazard area extends forward of the engine approximately 25 feet.
<h3>What impact, if any, would jet fuel and aviation gasoline have on a turbine engine?</h3>
Tetraethyl lead, which is present in gasoline, deposits itself on the turbine blades. Because jet fuel has a higher viscosity than aviation gasoline, it may retain impurities with greater ease.
Once the gasoline charge has been cleared, start the engine manually or with an electric starter while cutting the ignition and using the maximum throttle.
On the final approach, the aeroplane needs to be re-trimmed to account for the altered aerodynamic forces. A substantial nose-down tendency results from the airflow producing less lift on the wings and less downward force on the horizontal stabiliser due to the reduced power and slower velocity.
Learn more about turbine engine refer
brainly.com/question/807662
#SPJ4
Answer:
The uneven heating results in some of the atmosphere to be warmer than other parts and changes in volume and pressure which result in updrafts and can cause thunderstorms and other violent weather.
Explanation:
Generation of wind
Answer:
c) The slope is not constant and increases with increasing time.
Explanation:
The equation for the position of this particle (starting from rest is)
We can take derivative of this with respect to time t to get the equation of slope:
As time t increase, the slope would increases with time as well.
Answer with Explanation:
We are given that
Length of wire 1=
Length of wire 2=
Resistivity of copper wire=
Resistivity of aluminum wire=
Wire 1=Copper wire
Wire 2=Aluminum wire
Diameter of both wires are same and resistance of both wires are also same.
We know that
Resistance =
When diameter of wires are same then their cross section area are also same .
When resistance and area are same then the length of wire depend upon the resistivity of wire .
The length of wire is inversely proportional to resistivity.
When resistivity is greater then the length of wire will be short and when the resistivity is small then the length of wire will be large.
Therefore, 
Hence, the length of wire 1 (copper wire) is greater than the length of wire 2 (aluminum).
