Answer:
The similarities are
1) The length of E and F can be described by two parallel lines spaced 3 blocks apart where the parallel line on the left of both E and F is 2 blocks long, while the parallel line on the right is one block long
2) Both height of E and F can be described by two parallel lines spaced 2 blocks apart where the parallel line on the top of both E and F is 3 blocks long, while the parallel line at the bottom is one block long
3) The interior of E an F can be described by parallel lines 2 blocks long in the horizontal portion and one block long in the vertical portion
The differences are
1) The difference between E and F is that the parallel lines used for the construction of E are all one block higher than that of F
2) The other difference is that all the lines used for the construction of the figure E are 3 blocks to the left of those used for the construction of F
Figure F is essentially the translation of figure E three blocks to right and one block down
Step-by-step explanation:
Answer:
71
Step-by-step explanation:
8²=64
64+7=71
I hope this helps!
Answer:
These two figures are similar because 
equals 
Step-by-step explanation:
The figures will be similar if their ratios of the two sides are equal. So we need to check the ratios of the figures to see if they are similar or not.
For the smaller figure the ratio is , and for the bigger figure the ratio is which upon simplification reduces to .
So we see that the ratios are equal. Thus the figures are similar.
I believe it's a segment.
Answer:
1 circifurence 6 18.850 area in squre 28.270
2 Circumference 37.70 Area in Square Inches 144.000
3 circumference 6.283 area in square inches 3.142
4 circumference 21.990 area in squre inches 38.480
