All categories

3 years ago

Why does the moon orbit earth as opposed to the sun?

Physics

2 answers:

diamong [38]3 years ago

5 0

Full moon and Earth distance . sun and Moon long distance . but moon and Earth close distance

Sphinxa [80]3 years ago

3 0

Full moon and Earth distance . sun and Moon long distance . but moon and Earth close distance

You might be interested in

How does increasing energy affect the amplitude of a wave?

Crazy boy [7]

Answer:

The amount of energy carried by a wave is related to the amplitude of the wave

Explanation:

A high energy wave is characterized by a high amplitude; a low energy wave is characterized by a low amplitude. The energy imparted to a pulse will only affect the amplitude of that pulse.

Hope this helped!!!

5 0

3 years ago

What unita are used to measure electrical current

JulijaS [17]

Answer:

It's called an ampere!

Explanation:

The SI unit of electric current is the ampere, which is the flow of electric charge across a surface at the rate of one coulomb per second. The ampere (symbol: A) is an SI base unit Electric current is measured using a device called an ammeter.

Hope this helps :)

4 0

3 years ago

Read 2 more answers

A uniform magnetic field is perpendicular to the plane of a circular loop of diameter 13 cm formed from wire of diameter 2.6 mm

I am Lyosha [343]

Answer:

Rate of change of magnetic field is $3.466\times 10^3T/sec$

Explanation:

We have given diameter of the circular loop is 13 cm = 0.13 m

So radius of the circular loop $r=\frac{0.13}{2}=0.065m$

Length of the circular loop $L=2\pi r=2\times 3.14\times 0.065=0.4082m$

Wire is made up of diameter of 2.6 mm

So radius $r=\frac{2.6}{2}=1.3mm=0.0013m$

Cross sectional area of wire $A=\pi r^2=3.14\times0.0013^2=5.30\times 10^{-6}m^2$

Resistivity of wire $\rho =2.18\times 10^{-8}m$

Resistance of wire $R=\frac{\rho L}{A}=\frac{2.18\times 10^{-8}\times 0.4082}{5.30\times 10^{-6}}=1.67\times 10^{-3}ohm$

Current is given i = 11 A

So emf $e=11\times 1.67\times 10^{-3}=0.0183volt$

Emf induced in the coil is $e=-\frac{d\Phi }{dt}=-A\frac{dB}{dt}$

$0.0183=5.30\times 10^{-6}\times \frac{dB}{dt}$

$\frac{dB}{dt}=3.466\times 10^3=T/sec$

8 0

3 years ago

A marble resting near the edge of .90 m high table is given an initial horizontal speed of 1.24 m/s. What will be it’s horizonta

Maru [420]

Answer:

0.53 m

Explanation:

First of all, we have to consider the vertical motion of the ball, in order to find the time it takes for the marble to reach the ground. The initial height is $h=0.90 m$ , the initial vertical velocity is zero, while the acceleration is $g=-9.81 m/s^2$ , so the vertical position at time t is given by

$y(t)=h-\frac{1}{2}gt^2$

By demanding y(t)=0, we find the time t at which the ball reaches the ground:

$0=h-\frac{1}{2}gt^2$

$t=\sqrt{\frac{2h}{g}}=\sqrt{\frac{2(0.9 m)}{9.81 m/s^2}}=0.43 s$

Now we can find the horizontal range of the marble: we know the initial horizontal speed (v=1.24 m/s), we know the total time of the motion (t=0.43 s), and since the horizontal speed is constant, the total distance traveled on the horizontal direction is

$x=vt=(1.24 m/s)(0.43 s)=0.53 m$

8 0

3 years ago

My buddy and I have just finished a dive to 15 metres/50 feet for 60 minutes. We want to return to the same site and depth and s

marishachu [46]

Answer:

1) Periodically check the no stop or NDL time on their computers

2) The dive computer planning mode can be used if available

3) Make use of a dive planning app

4) Check data from the RDP table or an eRDPML

Explanation:

The no stop times information from the computer gives the no-decompression limit (NDL) time allowable which is the time duration a diver theoretically is able to stay at a given depth without a need for a decompression stop

The dive computer plan mode or a downloadable dive planning app are presently the easiest methods of dive planning

The PADI RDP are dive planners based on several years of experience which provide reliable safety limits of depth and time.

7 0

3 years ago