Check the picture below.
now, for 6 triangles, well, simply 6*6.
Answer:
Green part of the visible spectrum.
X ray part of the electromagnetic spectrum.
Infrared part of the electromagnetic spectrum.
Explanation:
Wien's displacement law

Where, b = Wien's displacement constant = 2.898×10⁻³ mK
T = Temperature in kelvin

So, the wavelength would be of around the green part of the visible spectrum.

So, the wavelength would be of around the X ray part of the electromagnetic spectrum.
Human body temperature = 37°C = 37+273.15 = 310.15 K

So, the wavelength would be of around the Infrared part of the electromagnetic spectrum.
Answer:
k = 1073.09 N/m
A = 0.05 m
Explanation:
Given:
- Time period T = 0.147 s
- maximum speed V_max = 2 m/s
- mass of the block m = 0.67 kg
Find:
- The spring constant k
- The amplitude of the motion A.
Solution:
- A general simple harmonic motion is modeled by:
x (t) = A*sin(w*t)
- The velocity of the above modeled SHM is:
v = dx / dt
v(t) = A*w*cos(w*t)
- Where A is the amplitude in meters, w is the angular speed rad/s and time t is in seconds.
- We can see that maximum velocity occurs when (cos(w*t)) maximizes i.e it is equal to 1 or -1. Hence,
- V_max = A*w
- Where w is related to mass of the object and spring constant k as follows,
w = sqrt ( k / m )
- The relationship between w angular speed and Time period T is:
w = 2*pi / T
- Equating the above two equations we have,
m*(2*pi / T)^2 = k
- Hence, k = 0.67*(2*pi / 0.157)^2
k = 1073.09 N / m
- So, amplitude A is:
A = V_max*sqrt ( m / k )
A = 2*sqrt ( 0.67 / 1073.09 )
A = 0.05 m
Its either B. force or A. net force but I will go with force because forces can either push or pull I hope it help you.
The order of the positive and negative feedback loops are positive, positive, negative, positive, positive, negative.
<h3>
What is a feedback loop?</h3>
A system component known as a feedback loop is one in which all or a portion of the output is used as input for subsequent actions. A minimum of four phases comprise each feedback loop. Input is produced in the initial phase. Input is recorded and stored in the subsequent stage. Input is examined in the third stage, and during the fourth, decisions are made using the knowledge from the examination.
Both negative and positive feedback loops are possible. Insofar as they stay within predetermined bounds, negative feedback loops are self-regulating and helpful for sustaining an ideal condition. One of the most well-known examples of a self-regulating negative feedback loop is an old-fashioned home thermostat that turns on or off a furnace using bang-bang control.
To learn more about feedback loop, visit:
brainly.com/question/11312580
#SPJ4