Answer: If your trying to get rid of em. The best way to do that is to put them in the recyling bin and then empty it. Doing that will delete them off your computer so they can't be found.
Explanation: Also keep in mind that whether or not you delete them they'll still be on your hard drive.
Answer:
The answer is ".pcapng"
Explanation:
Wireshark format includes a "dump" with data packets, which is collected over a channel and sometimes a common folder to store, that data in the PCAP Next Iteration file system.
- The .pcapng stands for the file system, this file system compatible with the recorded data transmission packet. It includes several data blocks.
- It is quite robust, but it should not be helped by the other devices. Wireshark allows the libpcap system as well.
Answer:
The space available will vary between 800 GB (100%) and 400 GB (50%) of the total disks, depending on the RAID level.
The OS will handle the RAID as a single disk.
Explanation:
Each RAID level implements parity and redundancy in a different way, so the amount of disks used for this extra information will reduce the space available for actual storage.
Usual RAID levels are:
<u>RAID 0:</u> does not implement any redundancy or parity, so you will have available 100% of the total storage: 8 x 100 GB = 800 GB
<u>RAID 1:</u> Duplicates all the information in one disk to a second disk. Space is reduced in half: 400 GB
<u>RAID 5:</u> Uses the equivalent of 1 disk of parity data distributed evenly on each disk, meaning the space available is 
of the total disks: 
of 800 GB = 700 GB
Writting and reading the information on a RAID storage is handled by a raid controller, either implemented in hardware or software. The OS will "see" a single disk and will read or write information as usual.
Answer: Could be subdivided into smaller and smaller units.
Explanation:
The continuous data are basically measured in the small units and can be easily subdivided into smaller parts without changing their actual meaning.
The continuous data also contain numeric value and can be divided into smaller and finer meaningful parts.
The continuous data can be measured according to the precision of the system. The size and volume are the example of the continuous data.
