Answer:75 percent
Explanation:so in order tro fin d thge efficiency i used the forumla ,efficency=useful output energy/input energyx100%,in order to use this formula i needed the output,which i found by subtracting the input energy with wasted energy,that gave me the output,and after founding the output,i put that into the formula,
output energy=input energy - wasted energy
output energy=6000j-1500j
output energy=4500
put that into the formula
efficiency =output energy/input enrgy x100%
efficiency=4500/6000 multiplied by 100%
efficiency=0.75x100%
efficiency=75%
Answer: hello your question lacks some data attached below is the missing data
answer : T - mg = ma
Explanation:
Given that the vine has a fixed end and Tarzan's path is circular
At Tarzans lowest point the point can be expressed as shown below.
It can be expressed as : T - mg = ma
Answer:
The two main categories of boat hull designs are;
- Displacement Hull
- Planning Hull
Explanation:
<u>Displacement Hull</u>
This type of boat hull is designed to displace certain amount of water as it moves. This displacement enable it to insert its body into the water and continue to displace water from its was as it moves. The weight of water displaced is usually equal to the weight of the boat.
Displacement Hull and Speed
Because of the need to displace water from its path to enable it insert itself into the water body for movement, the speed is usually slow compared to planning hull boats.
Displacement Hull Types:
- Round bottomed hull boat: Their hulls are made to have a round bottom in order to displace water and move smoothly through it. It can move quietly at low speed. How ever, they require complex stabilizer to control them from banking.
- Multi hull boat: This type of hull design has a large and long beam that make it to be very stable on the water body. They usually have ends pointed downwards for proper insertion and displacement. However, they don't turn easily on small space due to their large beam requirement.
<u>Planning Hull</u>
Planning hull boats are designed to slide very fasly on the water surface with very little or no insertion. They require boat engines that operates at a very high revolution per minute(rpm).
When at rest, that is at zero speed, they behave like displacement hull boats but only a small amount of water is displaced a they are usually lighter.
Planning hull boats can operate in three modes:
- Displacement mode: This mode is used when planning hull boats move at extremely slow speed. At this mode, they push water side ways as they move.
- Planning mode: This mode is activated as the speed of the boat increases to enable it glide on the surface of the water.
- Plowing mode: This mode is reach when the bow of the boat is trusted up and suspended as it slides through the surface of the water at a very high speed
Planning Hull and Speed
The speed of planning hull boats is very high when compared to displacement hull boats. This high speed of operation is powered by high rpm engines to enable it slide on the surface of the water.
Planning Hull Types/Merit and Demerit
- Flat Bottom Hull: Their hull is flat bottom shaped and has a draft that supports its suspension on water on a stable manner. Suitable for stable water. However, it moves haphazardly on shaky water.
- Deep Vee Hull: It has a V-shape hull that points towards the water body. Its V-shape makes it glide through rough water surfaces more smoothly than the flat bottom hull. However, it requires more power to operate and easily banks during sharp turning.
Answer:
The magnitude of the frictional force is 
Explanation:
From the question we are told that
The force exerted on the box is 
Generally for the box to remain at rest then it means that the frictional force is greater than or equal to the force applied to move it i.e
=>
Answer: Speeding Up
Explanation:
Force is proportional to the acceleration of an object. The greater the force, the more acceleration will be produced.
When the force on the tire is equal to the weight of the car, the car is reaching a stability as a result of increase in motion.
But when the force of the load on the tire is quite large(most likely several times the weight of the car) and is directed forward, then, the car is at high speed.
