What factors affect the temperature when vapor condenses

In a 1D compression test with double drainage, the pore pressure readings are practically zero after 8 minutes for a clay sample

frosja888 [35]

Answer:

The duration of the consolidation process for the same clay is 32 min

Explanation:

for clay 1:

t1=0

H1=thickness=2 cm

for the clay 2:

t2=?

H2=2 cm

The time factor is equal to:

$T=(\frac{Cv}{d^{2} })t$

where Cv is the coefficient of consolidation

$(\frac{Cvt}{d^{2} })_{1}= (\frac{Cvt}{d^{2} })_{2}$

if Cv is constant, we have:

$(\frac{t1}{(\frac{H1}{2}) ^{2} })_{1}=(\frac{t2}{H2^{2} })_{2}\\\frac{0}{(\frac{2}{2})^{2}) }=\frac{t2}{2^{2} }$

Clearing t2:

t2=32 min

3 0

3 years ago

Stone has been used as a building material since ancient times because of its compressive strength, which is the __________.

Doss [256]

Complete Question:

Stone has been used as a building material since ancient times because of its compressive strength, which is the?

Group of answer choices

A. ability to support pressure without breaking.

B. ability to press down and become solidly fixed in the ground.

C. relative weight of a block of stone to its size.

D. force a block exerts on the blocks around it.

Answer:

A. ability to support pressure without breaking.

Explanation:

Stone has been used as a building material since ancient times because of its compressive strength, which is the ability to support pressure without breaking.

Compressive strength can be defined as the ability of a structural element or particular material to withstand an applied, which is aimed at reducing the size of the structural element.

Simply stated, it is the ability of a structural element or material to withstand an applied load without deflections, fracture or having any crack.

In this context, a stone possesses the ability to resist or withstand compression loads.

Some examples of other materials or structural elements having good compressive strength are steel, bones, concrete etc. The standard unit of measurement of the compressive strength of a material is Mega Pascal (MPa) or pound-force per square inch (psi) in the United States of America.

7 0

4 years ago

Carbon dioxide gas enters a well-insulated diffuser at 20 lbf/in.2 , 500R, with a velocity of 800 ft/s through a flow area of 1.

inessss [21]

Answer:

Exit Temperature= T2=563.6 °R

Exit Pressure= P2= 30.06 lbf/in^2

Mass Flow rate=1.276 lb/sec

Explanation:

Answer is explained in detailed way in the attached files.

4 0

3 years ago

Deep-ocean fish cannot survive in shallow water, because the water

shutvik [7]

Answer: 3. Test the prototype against the design criteria.

Explanation: Dovnovan should test his prototype before anything eles to work out any kinks in the design and write down the problems, and build another one before telling others about the project

6 0

4 years ago

Read 2 more answers

Animation can occur before an action

Slav-nsk [51]

Answer:Animation can occur before an action. Prepares the audience for the action. ... A pose or action should clearly communicate to the audience the attitude, mood, reaction or idea of the character. The effective use of long, medium or close up shots, as well as camera angles helps tell the story.

Explanation:May i have brainlist plz only if u wanna give me brainlist though have an nice day and stay safe.

6 0

3 years ago