Answer:
d) 1 volt
Explanation:
The allowable range is 1 volt. The allowed tolerance (deviation from nominal) depends on what the nominal voltage is.
Answer:
Have the power company install insulated sleeves (also known as “eels”) over power lines.
Wearing PPE is the only way to prevent being electrocuted
Explanation:
To prevent electrocution at workplace, employers can ensure that the power company install insulated sleeves (also known as “eels”) over power lines. Additionally, the employees should wear PPEs which are insulators to prevent electrocution.
Answer:
Explanation:
Given that
Length of packet = L
Number of routers = 6
Propagation delay = d-proc
Queuing delay = d-que
The formula for finding end to end delay given as
Answer:
10.984mm
Explanation:
by elastic modulus
stress=modulus of elasticity*strain
stress=loading/area area" cross-section"
11mm=0.011m
area=π(d/2)^2=π(0.011/2)^2=9.503*10^-5 square meter
stress=55000/(9.503*10^-5)=578.745 MPa
convert MPa and GPa to pascal.
strain=stress/modulus=(578.745*10^6)/(125*10^9)=0.00463............axial strain
v=Poisson ratio
lateral strain=(-v)*axial strain= -0.31*0.00463
lateral strain= -1.4353*10^-3=change in diameter/ original diameter
change in diameter=(-1.4353*10^-3)*0.011= -1.57883*10^-5 m
negative indicates decrease in diameter.
decrease in dia.=0.01578mm
new diameter=11-0.01578= 10.984mm