All categories

2 years ago

X-ray production occurs in which process?

Physics

1 answer:

salantis [7]2 years ago

4 0

Answer:

Explanation:

X-rays are produced due to sudden deceleration of fast-moving electrons when they collide and interact with the target anode. In this process of deceleration, more than 99% of the electron energy is converted into heat and less than 1% of energy is converted into x-rays

You might be interested in

Calculate the rate of heat conduction through a layer of still air that is 1 mm thick, with an area of 1 m, for a temperature of

max2010maxim [7]

Answer:

The rate of heat conduction through the layer of still air is 517.4 W

Explanation:

Given:

Thickness of the still air layer (L) = 1 mm

Area of the still air = 1 m

Temperature of the still air ( T) = 20°C

Thermal conductivity of still air (K) at 20°C = 25.87mW/mK

Rate of heat conduction (Q) = ?

To determine the rate of heat conduction through the still air, we apply the formula below.

$Q =\frac{KA(\delta T)}{L}$

$Q =\frac{25.87*1*20}{1}$

Q = 517.4 W

Therefore, the rate of heat conduction through the layer of still air is 517.4 W

6 0

3 years ago

Read 2 more answers

A crate filled with delicious junk food rests on a horizontal floor. Only gravity and the support force of the floor act on it,

stealth61 [152]

The words "... as shown ..." tell us that there's a picture that goes along
with this question, and you decided not to share it. That's sad and
disappointing, but I think the question can be answered without seeing
the picture.

The net force on the crate is zero. Evidence for this is that fact that
the crate is just sitting there. If the net force on an object is not zero,
then the object is accelerating ... it's either speeding up, slowing down,
or its the direction of its motion is changing. If none of these things is
happening, then the net force on the object must be zero.

4 0

3 years ago

The air in a kitchen has a mass of 60.0kg and a specific heat of 1505J/(kg°C).

BARSIC [14]

Your answer is 632,100J which is Choice D

8 0

4 years ago

Read 2 more answers

Problem 4: A uniform flat disk of radius R and mass 2M is pivoted at point P A point mass of 1/2 M is attached to the edge of th

brilliants [131]

From the case we know that:

The moment of inertia Icm of the uniform flat disk witout the point mass is Icm = MR².
The moment of inerta with respect to point P on the disk without the point mass is Ip = 3MR².
The total moment of inertia (of the disk with the point mass with respect to point P) is I total = 5MR².

Please refer to the image below.

We know from the case, that:

m = 2M

r = R

m2 = 1/2M

distance between the center of mass to point P = p = R

Distance of the point mass to point P = d = 2R

We know that the moment of inertia for an uniform flat disk is 1/2mr². Then the moment of inertia for the uniform flat disk is:

Icm = 1/2mr²

Icm = 1/2(2M)(R²)

Icm = MR² ... (i)

Next, we will find the moment of inertia of the disk with respect to point P. We know that point P is positioned at the arc of the disk. Hence:

Ip = Icm + mp²

Ip = MR² + (2M)R²

Ip = 3MR² ... (ii)

Then, the total moment of inertia of the disk with the point mass is:

I total = Ip + I mass

I total = 3MR² + (1/2M)(2R)²

I total = 3MR² + 2MR²

I total = 5MR² ... (iii)

Learn more about Uniform Flat Disk here: brainly.com/question/14595971

#SPJ4

8 0

2 years ago

Question in pic asap plz

REY [17]

We can’t see anything

5 0

3 years ago