All categories

3 years ago

50 PTS

Physics

2 answers:

Dmitrij [34]3 years ago

8 0

Answer:

It will move away from the large ball because like charges repel.

Explanation:

Because both of them are "like" charges they will repel and so the other answers are wrong

Vaselesa [24]3 years ago

3 0

Answer:

It will move away from the large ball because like charges repel.

Explanation:

Electric force is the force that pushes apart two like charges, or that pulls together two unlike charges. The basic law of electrostatics Like charges of electricity repel each other, whereas unlike charges attract each other. When small, positively charged ball is moved close to a large, positively charged ball it would be pushed away from the large positively charged ball since they are both positively charged. One has to put in energy to try to move the small ball closer to the large ball. The closer one try to move it to the large ball, the more energy one has to put in, so the more electrical potential energy the small ball would have.

You might be interested in

A toy gun uses a spring to project a 4.5-g soft rubber sphere horizontally. The spring constant is 8.0 N/m, the barrel of the gu

marishachu [46]

Answer:

1.93 m/s

Explanation:

Parameters given:

Mass = 4.5g = 0.0045kg

Spring constant = 8.0 N/m

Length of barrel = 13 cm = 0.013m

Frictional force = 0.035N

Compression = 5.8 cm = 0.058m

First, we find the P. E. stored in the spring:

P. E. = ½*k*x²

P. E. = ½ * 8 * 0.058² = 0.013J

Then, we find the work done by the frictional force while the sphere is leaving the barrel of the gun:

Work = Force * distance

The distance here is the length of the barrel.

Work = 0.035 * 0.13 = 0.0046 J

The kinetic energy of the sphere can now be found:

K. E. = P. E. - Work done

K. E. = 0.013 - 0.0046 = 0.0084J

We can now find the speed using the formula for K. E.:

K. E. = ½*m*v²

0.0084 = ½ * 0.0045 * v²

v² = 0.0084/0.00255 = 3.733

=> v = 1.93 m/s

4 0

3 years ago

Read 2 more answers

Simple but not plagiarized answer for "what is forces and motion?"

egoroff_w [7]

FORCE-physical power or strength possessed by a living being:
He used all his force in opening the window.

MOTION-the action or process of moving or of changing place or position; movement.

7 0

3 years ago

If the pressure exerted on a 300.0 mL sample of hydrogen gas at constant temperature is increased from 0.500 kPa to 0.750 kPa, w

uranmaximum [27]

Answer:

200 mL

Explanation:

Given that,

Initial volume, V₁ = 300 mL

Initial pressure, P₁ = 0.5 kPa

Final pressure, P₂ = 0.75 kPa

We need to find the final volume of the sample if pressure is increased at constant temperature. It is based on Boyle's law. Its mathematical form is given by :

$V\propto \dfrac{1}{P}\\\\P_1V_1=P_2V_2$

V₂ is the final volume

$V_2=\dfrac{P_1V_1}{P_2}\\\\V_2=\dfrac{300\times 0.5}{0.75}\\\\V_2=200\ mL$

So, the final volume of the sample is 200 mL.

5 0

3 years ago

if your reading this never take life for granted i had corona 19 i found out what life really is and god is the only cure

Shtirlitz [24]

Answer:

omg i'm so sorry, i hope you get better <3!

Explanation:

8 0

3 years ago

A steam Rankine cycle operates between the pressure limits of 1500 psia in the boiler and 2 psia in the condenser. The turbine i

AlladinOne [14]

Answer:

a. Mass flow rate through the boiler = 5.462lbm/s

b. Power produced by the turbine = 2525.8kW

c. The rate of heat supply in the boiler = 6901.42Btu/s

d. Thermal efficiency of the cycle = 34.3%

Explanation:

In order to provide a solution, we must assume that ;

- The system is operating at a steady condition

- Kinetic and potential energy changes are negligible

Now from steam tables, we calculate specific volume $v$ and enthalpy $h$ as,

$h_1 = 95.96Btu/lb$ ( $h_1 = h_f$ at $2psia$ )

$v_1 = 0.016238ft^3/lb$ ( $v_1 = v_f$ at $2psia$ )

$w_{p,in} = v_1(P_2-P_1) = 0.016238(1500-2) * \frac{1}{5.404} = 4.501 Btu/lb$

$w_p = h_2 - h_1\\h_2 = w_p+h_1=4.501+95.96=100.461Btu/lb$

$h_3 = 1364.0Btu/lb$

$s_3 = 1.5073Btu/lb.R$

( at $P_3 = 1500psia$ & $T_3 = 800^0F$ )

$P_4 = 2psia\\S_4 = S_3\\x_4S = \frac{S_4-S_f}{S_{fg}}=\frac{1.5073-0.1783}{1.7374}=0.765$

( $S_f$ & $S_{fg}$ when pressure is 2psia)

$h_4S = h_f+x_4S*h_{fg}=95.96+(0.765)(1021.0)=877.025Btu/lb$

$n_T= \frac{h_3-h_4}{h_3-h_4S}\\ h_4=h_3-n_T(h_3-h_4S)=1364.0-0.90(1364.0-877.025)=925.7Btu/lb$

Therefore,

$q_{in}=h_3-h_2=1364.0-100.461=1263.54Btu/lb\\q_{out}=h_4-h_1=925.7-95.96=829.74Btu/lb\\w_{net}=q_{in}-q_{out}=1263.54-829.74=433.8Btu/lb$

To calculate the mass flow rate of steam in the cycle, we use the formula

$W_{net}=mw_{net}\\m=\frac{W_{net}}{w_{net}} =\frac{2500}{433.8}=5.763*(\frac{0.94782Btu}{1Kj} )=5.462lb/s$

where $1Kj = 0.947817 Btu$

The power output and the rate of heat addition are calculated thus,

$W_{T,out}=m(h_3-h_4)=(5.462lb/s)*(1364-925.7)Btu/lb*(\frac{1Kj}{0.94782Btu} )\\=5.462*438.3*1.055=2525.8KW$

$Q_{in}=mq_{in}=5.462(1263.54)=6901.46Btu/s$

The thermal efficiency of the cycle can be found thus;

$n_{th}=\frac{W_{net}}{Q_{in}} =\frac{2500}{6901.46}*(\frac{0.94782Btu}{1Kj} ) =0.343$

= 34.3%

5 0

3 years ago