All categories

3 years ago

Describe two ways to change the frictional force between two solid surfaces.

1 answer:

5 0

<span>There are several ways to change the frictional force between two objects. The first one is to modify the surfaces of each object that will come in contact with each other. The smoother they get, the less friction there will be. But if the surfaces become rougher, more friction will be generated. If you don’t want to alter the surfaces, you can simply add lubrication to reduce friction.</span>

You might be interested in

Graph are pictorical representations of

inn [45]

Answer:

Graphs are pictorial representations of relationships.

6 0

3 years ago

Read 2 more answers

to move a resting box of 100 Newton on the ground with kinetic friction coeficient of 0,250 is applied a force of 60 N horizonta

krok68 [10]

Work is calculated by multiplying force by the distance that the object had moved. The applied force is 60 N, moving the object by 10 m. Thus, the work does is 600 J. For the friction force which is equal to,
100N x 0.250 = 25.0 N
the work done is,
W = (60 N - 25 N) x 10 m = 350 J
The kinetic energy of the box can be equated to this force. Thus, the answer is also 350 J.

6 0

3 years ago

The current in a series circuit is 19.3 A. When an additional 7.40-Ω resistor is inserted in series, the current drops to 13.4 A

Bogdan [553]

Answer:

16.8ohms

Explanation:

According to ohm's law which states that the current passing through a metallic conductor at constant temperature is directly proportional to the potential difference across its ends.

Mathematically, V = IRt where;

V is the voltage across the circuit

I is the current

R is the effective resistance

For a series connected circuit, same current but different voltage flows through the resistors.

If the initial current in a circuit is 19.3A,

V = 19.3R... (1)

When additional resistance of 7.4-Ω is added and current drops to 13.4A, our voltage in the circuit becomes;

V = 13.4(7.4+R)... (2)

Note that the initial resistance is added to the additional resistance because they are connected in series.

Equating the two value of the voltages i.e equation 1 and 2 to get the resistance in the original circuit we will have;

19.3R = 13.4(7.4+R)

19.3R = 99.16+13.4R

19.3R-13.4R = 99.16

5.9R = 99.16

R= 99.16/5.9

R = 16.8ohms

The resistance in the original circuit will be 16.8ohms

5 0

3 years ago

Explain the difference between what Isaac Newton and Louis de Broglie would have to say about the momentum of a particle that is

pishuonlain [190]

Answer:

Explained

Explanation:

Newton would resort to the classical mechanics and say that the momentum of the particle that is moving with a constant velocity will be given by: momentum = mass x velocity

this approach will highlight the particle nature and will not be relativistic.

De-Broglie will say that the momentum of the particle is related to its associated matter wave and the relation between them is given by:

$p = \frac{h}{\lambda}$

where \lambda = wavelength of the matter wave associated to the particle, h = planck's constant

and $p = \gamma\times mv$

thus, this highlights the wave nature of the particle and is also relativistic.

6 0

2 years ago

What would happen if the pilot did not keep the airplane "trimmed"

Mademuasel [1]

Answer:

In explanation

Explanation:

Pilots who dont use trim often like the feeling of holding constant back pressure because The heavier control forces makes it more difficult to over-control the airplane inside the turn, so it gives the sense of a more stable flight

3 0

3 years ago