Answer:
The major effects of ice accretion on the aircraft is that it disturbs the flow of air and effects the aircraft's performance.
Explanation:
The ice accretion effects the longitudinal stability of an aircraft as:
1. The accumulation of ice on the tail of an aircraft results in the reduction the longitudinal stability and the elevator's efficacy.
2. When the flap is deflected at 
with no power there is an increase in the longitudinal velocity.
3. When the angle of attack is higher close to the stall where separation occurs in the early stages of flow, the effect of ice accretion are of importance.
4. When the situation involves no flap at reduced power setting results in the decrease in aircraft's longitudinal stability an increase in change in coefficient of pitching moment with attack angle.
Answer:
b) decreased
Explanation:
Viscosity is the measure of the resistance between the layers of the liquid. On increasing temperature, the kinetic energy of the molecules of the liquid increases which in turn increase in the random motion of the molecules. Thus, the relative motion of the molecules in the liquid become easier and hence, viscosity decreases.
Answer:
Option c)
Explanation:
a.The carbon content of eutectoid steel, which is an carbon- iron alloy, is in between 0.80-0.83%
b. In hypoeutectoid steel, the carbon composition is less than 0.80% and is approximately 0.76%
c. In hypereutectoid steel, the carbon composition ranges from 0.80% - 2.0%
d. In wrought iron, the iron composition is quite low about 0.08%
Answer:
Technician A is corect
Explanation:
Because he said the correct reason
Answer:
C. The vehicle safety check indicates the ABS is functioning normally.
Explanation:
ABS, an antilock braking system, is a safe and secure slip-resistant braking system in cars and air-crafts. <u>An ABS is there to prevent wheel-locking while using brakes in vehicles</u>.
When one ignites a car, the ABS indicator will light up briefly as a part of safety check.<em> The ABS indicator light comes on for a few seconds before it turns off again. This indicates that the ABS system is functioning normally</em>. But, if the ABS indicator light remains after turning on the ignition, this indicates that there is a problem in the system.
In the given scenario, the ABS indicator is functioning properly, thus the correct answer is the third option (C).
