Answer:
True
Explanation:
Mass burn technology is a type of waste-to-energy technology commonly used in the mass-burn system, where unprocessed municipal solid waste is burned in a large incinerator with a boiler, to generate heat used in the production of electricity.
Answer:
%Reduction in area = 73.41%
%Reduction in elongation = 42.20%
Explanation:
Given
Original diameter = 12.8 mm
Gauge length = 50.80mm
Diameter at the point of fracture = 6.60 mm (0.260 in.)
Fractured gauge length = 72.14 mm.
%Reduction in Area is given as:
((do/2)² - (d1/2)²)/(do/2)²
Calculating percent reduction in area
do = 12.8mm, d1 = 6.6mm
So,
%RA = ((12.8/2)² - 6.6/2)²)/(12.8/2)²
%RA = 0.734130859375
%RA = 73.41%
Calculating percent reduction in elongation
%Reduction in elongation is given as:
((do) - (d1))/(d1)
do = 72.14mm, d1 = 50.80mm
So,
%RA = ((72.24) - (50.80))/(50.80)
%RA = 0.422047244094488
%RA = 42.20%
Answer:
Option C: water pressure.
Explanation:
Water pressure allows water to reach the top of a building.
In order to develop this problem it is necessary to take into account the concepts related to fatigue and compression effort and Goodman equation, i.e, an equation that can be used to quantify the interaction of mean and alternating stresses on the fatigue life of a materia.
With the given data we can proceed to calculate the compression stress:
Through Goodman's equations the combined effort by fatigue and compression is expressed as:
Where,
Fatigue limit for comined alternating and mean stress
Fatigue Limit
Mean stress (due to static load)
Ultimate tensile stress
Security Factor
We can replace the values and assume a security factor of 1, then
Re-arrenge for 
We know that the stress is representing as,
Then,
Where 
=Max Moment
I= Intertia
The inertia for this object is
Then replacing and re-arrenge for
Thereforethe moment that can be applied to this shaft so that fatigue does not occur is 3.2kNm
