Answer:
(C) passive state.
Explanation:
The earth pressure is the pressure exerted by the soil on the shoring system. They are three types of earth pressure which are:
a) Rest state: In this state, the retaining wall is stationary, this makes the lateral stress to be zero.
b) Active state: In this state, the wall moves away from the back fill, this leads to an internal resistance. Hence the active earth pressure is less than earth pressure at rest
c) Passive state: In this state the wall is pushed towards the back fill, this leads to shearing resistance. Hence, the passive earth pressure is greater than earth pressure at rest
Answer:
a cycle or series of cycles of economic expansion and contraction.
Explanation:
Answer:
Both model building codes and NFPA 220 can be used to determine the type of construction used in a building.
Answer:
In ferrous metal iron present but on the other hand in the non ferrous material iron does not present.That is why there is a different heat treatment process for ferrous and nonferrous materials.
Ferrous materials contains iron is the main constitute.Like steel ,cast iron ,wrought iron .Steel and cast iron are the alloy element of iron ans carbon.Wrought iron is the purest from of iron.
Heat treatment process for ferrous materials :
1.Normalizing
2.Annealing
3.Quenching
4.Surface hardening
Heat treatment process for non ferrous materials :
Mostly annealing process is used for non ferrous materials.After annealing non ferrous will become soft.
When two metal plates are joined then they form a bimetallic structure.The bimetallic structure is used to find the relationship of thermal temperature and the mechanical displacement.
The use of bimetallic structure -In clock ,thermometers ,engines.
Answer:
(a) ------(3). (b)------(1) (c)-----(5) (d)------(2) ------ (e) -----4
Note: Kindly find an attached copy of the diagram associated with the solution to the question below.
Sources: the diagram to this question was researched from Quizlet
Explanation:
Solution
(1) Part (a)a waveform has a high frequency components compared to another waveform. the corresponding frequency components should be high.
So for the wave form a the corresponding frequency spectrum is (3)
(2) For part (b), waveform has three harmonics, the corresponding frequency spectrum is (1)
(3) The time domain waveform plot (c) is a sine wave but there exists a dc component.
Thus x[0] ≠0
For (c) the corresponding frequency spectrum is (5)
(4) For part (d) the corresponding frequency spectrum is (2)
(5) A sine wave is made of a single frequency only and its spectrum is a single point
For (e) the corresponding frequency spectrum is (4)
